This thread will list errata for ITMD3.
Announcement
Collapse
No announcement yet.
Errata
Collapse
This topic is closed.
X
This is a sticky topic.
X
X
-
The following have been corrected in the book revision marked "3.02":
p571, last paragraph: 14.88ms and 47ms should be 14.88us and 47us.
p563, Fig C-5 was incorrectly normalized to "1", whereas it should have been semi-normalized in the same manner as Fig C-4 & Fig C-6. The second paragraph on p565 talks about the 500us target in Fig C-5 having a peak current of "2.4" while the plot shows a peak of "1". The plot should look like this:
I have also changed the y-axis in C-5 and C-6 to say "Semi-Normalized" to match C-4.Last edited by Carl-NC; 12-23-2024, 03:31 AM.
Comment
-
The following will be corrected in the next minor revision (3.03):
p159: last paragraph, "depends on exactly how the “D”s9 are shaped" should be "depends on exactly how the “D”s are shaped".
p417: "Because depletion capacitance varies with reverse voltage many capacitor data sheets" should be "Because depletion capacitance varies with reverse voltage many diode data sheets".
Last edited by Carl-NC; 02-11-2025, 05:52 PM.
Comment
-
The schematic for the Bipolar PI design (Pulse5) has several errors. The schematic (Figs 23-18 through 23-21) has been updated along with some of the explanatory text on p454. These 5 pages are in the PDF below.
BipolarPI_450-454.pdf
Fixed in 3.03.
Attached FilesLast edited by Carl-NC; 02-11-2025, 05:53 PM.
Comment
-
Fig 23-11 (p446) is wrong. It should look like this:
That is, the "Q4-on" waveforms are flipped.
3.04 changes:- Fixed Fig 23-11
- Edited the footnote on p113 so that the URL fits on one line
- Fixed the schematic on p610 -- it was slightly getting cropped
- Added Nexus to the logos p612 (sorry Georgi, it was an oversight)
Last edited by Carl-NC; 02-12-2025, 12:29 AM.
Comment
Comment