Announcement

Collapse
No announcement yet.

Errata

Collapse
This topic is closed.
X
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Errata

    This thread will list errata for ITMD3.
    Last edited by Carl-NC; 12-08-2024, 06:15 PM.

  • #2
    In both Tables of Contents, the Appendices are listed as Chapter A, etc. They should have been listed as Appendix A, etc. This has been corrected in books marked "3.01" (top of the copyright page).

    Comment


    • #3
      The following have been corrected in the book revision marked "3.02":

      p571, last paragraph: 14.88ms and 47ms should be 14.88us and 47us.

      p563, Fig C-5 was incorrectly normalized to "1", whereas it should have been semi-normalized in the same manner as Fig C-4 & Fig C-6. The second paragraph on p565 talks about the 500us target in Fig C-5 having a peak current of "2.4" while the plot shows a peak of "1". The plot should look like this:

      Click image for larger version

Name:	image.png
Views:	248
Size:	76.9 KB
ID:	431779
      I have also changed the y-axis in C-5 and C-6 to say "Semi-Normalized" to match C-4.
      Last edited by Carl-NC; 12-23-2024, 03:31 AM.

      Comment


      • #4
        The following will be corrected in the next minor revision (3.03):

        p159: last paragraph, "depends on exactly how the “D”s9 are shaped" should be "depends on exactly how the “D”s are shaped".

        p417: "Because depletion capacitance varies with reverse voltage many capacitor data sheets" should be "Because depletion capacitance varies with reverse voltage many diode data sheets".
        Last edited by Carl-NC; 02-11-2025, 05:52 PM.

        Comment


        • #5
          The schematic for the Bipolar PI design (Pulse5) has several errors. The schematic (Figs 23-18 through 23-21) has been updated along with some of the explanatory text on p454. These 5 pages are in the PDF below.

          BipolarPI_450-454.pdf

          Fixed in 3.03.
          Attached Files
          Last edited by Carl-NC; 02-11-2025, 05:53 PM.

          Comment


          • #6
            Fig 23-11 (p446) is wrong. It should look like this:
            Click image for larger version  Name:	image.png Views:	0 Size:	20.5 KB ID:	433985
            That is, the "Q4-on" waveforms are flipped.

            3.04 changes:
            • Fixed Fig 23-11
            • Edited the footnote on p113 so that the URL fits on one line
            • Fixed the schematic on p610 -- it was slightly getting cropped
            • Added Nexus to the logos p612 (sorry Georgi, it was an oversight)
            Last edited by Carl-NC; 02-12-2025, 12:29 AM.

            Comment


            • #7
              Eq. 24-1 on p 472 should be

              Comment


              • #8
                On p323 the Audio paragraph should say "and divided again by 4 to create a 156 Hz audio tone for discriminated targets."
                Likewise, Fig 17-14 shows "78Hz" at the base of Q5; it should be 156Hz.

                Comment


                • #9
                  On p550, B.2: "Even thought..." should be "Even though..."

                  Comment


                  • #10
                    On p551 Eq B7 should not have 'r' in the numerator. The correct formula is



                    Also, dave should be 0.5(dout+din).

                    Comment

                    Working...
                    X