PI-GB Design

[algan]

Hi Carl, can you tell me where in the code I need to correct the Pulse-4 Firmware (PI-GB) code, so I can try to test the TDI GB as well? For example
at a frequency of 3200 hertz. Thank you.

[Carl-NC]

Timing parameters are in Pulse.c:



I would also disable the frequency control pot so you don't get into thermal trouble; comment out lines 72 & 73 in PulseADC.c:

[pechkata]

Hello Carl-NC
Everything works fine after I started the feed pump according to this scheme...
But now when I turn on the 74HCT4316 switch it changes the sound and changes the power supply...
Is there a way to fix this...?

https://www.youtube.com/shorts/gn4ItNZ9rDY