wanted to buy: PI pcb fully assembled

[skookum]

Hi,
Want to buy a PI pcb fully assembled due to my lack of skill/experience to solder electronic components,
Surf PI
Hammerhead
Baracuda Legend
or similar.
Not intended for nuggets but for coins and small jewellery.
Coil to be used has 24cm diameter and 1,9 Ohms impedance.
Thanks in advance
skookum

[sinko1]

Here your board http://crazy-tech.net/index.php?rout...&product_id=56

[skookum]

Hi,
Do you make this pcb ??
I have not heared of it and I do not have the skill nor the equipment to eliminate any design flaws so I thought I may stick to a unit with a proven track record even if that can/will result in a little bit less detection depth.
I will rather be honest about my capabilities rather than pester the seller to death with questions as to why I can´t get the unit to work.
But I thank you for the link - I will ask more knowledgeable people than myself if this unit can be made to work with the skills of an amateur (meaning myself)
greetings
skookum

[sinko1]

will be pleasantly surprised by the depth and easy setup of the board.Regards

[WM6]

Hello sinko1, somewhere you mentioned that you have Vandal Pulse 3 as improved version of Vandal Pulse 2, but I cannot find it on your web site. You abandoned this version?

[kt315]

Surf PI - no discrimination, conventional schematic for diving use
Hammerhead - no disc
Baracuda Legend - no disc, conventional schematic for diving use
Vandal Pulse - no disc, no schematic, no info

your choice?

[sinko1]

Hello sinko1, somewhere you mentioned that you have Vandal Pulse 3 as improved version of Vandal Pulse 2, but I cannot find it on your web site. You abandoned this version?

Hi,WM6 yes it is will be ready coming soon.Regards

[sinko1]

Surf PI - no discrimination, conventional schematic for diving use
Hammerhead - no disc
Baracuda Legend - no disc, conventional schematic for diving use
Vandal Pulse - no disc, no schematic, no info

your choice?

Mr. kt315 why do not you write in your topic but spamming other topics? Man clearly wrote that, looking ready running board, and you ask for the scheme?If you want please send fully asembled board from your pcbs to skookum

[kt315]

Mr. kt315 why do not you write in your topic but spamming other topics? Man clearly wrote that, looking ready running board, and you ask for the scheme?If you want please send fully asembled board from your pcbs to skookum

FULLY assembled Hammerhead. yes. I offer to skookum. call your price PLEASE, Mister Inkognito Sinko Primary.

[skookum]

Hi,
No need to squabble, guys.
I asked for a fully assembled board due to my lack of electronic skills.
Must be lots of people here who can use the cash to finance their next stage of project development.
Making coil, enclosure and shaft myself is no problem - that´s mechanical work.
I was actually looking to buy a PI made in Canada but shipping cost of 138$US on top of purchase price is prohibitive.
To boot, the shipping cost is an added value to the product so I have to pay import duty on that as well.
So I figure to buy a board made within the EU since I live in Germany.
Thanks again for the links and offers
Keep calm
skookum

[skookum]

Add to last post

I look at it this way.
There are many people building hot rods / custom cars that do not build their own transmissions.
Instead they go to someone who is an expert in that field and buy from them.
They actually do not care HOW the transmission works - they just want it to work.
This is the way I look at the board for my PI
I have no use for schematics because I don´t understand the electronic engineering behind it.
All I care about it is that it functions, because I actually do go out and use my detectors to go detecting.
As for discrimination - I have many good VLF detectors that have discrimination so this feature is not of the utmost importance on my PI
Thought I might add that.
Greetings
skookum

[sinclairuser]

yes postage from usa and canada is prohibitive to uk/eu, lots of kits i would like but no way i'm paying for excessive shipping.
sometimes the postage is 4 times the purchase price, and they wonder why their small business world trade is down.

[WM6]

This is very true sinclairuser. But shipping cost from USA to EU, for detector of the same weight and volume, can vary from $49,20 (my last buy) to over $300 in some cases (not decided to buy). Seems shipping costs are highly depended on seller policy (some of those do not want to bother with export procedure and avoid this by high shipping cost).

@ skookum: both offer (KT315 for Hammerhead and sinko1 for Vandal 2) are form EU, so no import charges for you in Germany. And shipping costs, I think, are cheap or even free.

[sinko1]

FULLY assembled Hammerhead. yes. I offer to skookum. call your price PLEASE, Mister Inkognito Sinko Primary.

Ok good luck.regards

[sinko1]

FULLY assembled Hammerhead. yes. I offer to skookum. call your price PLEASE, Mister Inkognito Sinko Primary.

ok good luck.Regards