Looking for the Gerber files

[N0QBH]

In the ITMD book on page 255 it says the Gerber files are on the book web site.
http://www.geotech1.com/itmd

No find.

[Qiaozhi]

In the ITMD book on page 255 it says the Gerber files are on the book web site.
http://www.geotech1.com/itmd

No find.

Sorry, we haven't had any spare time yet to put the Gerber files there, but we're working on it.
Hope to have something posted soon.

[GoldenKiwi]

Just received my copy of the book and am keen to start experimenting.
http://www.geotech1.com/itmd includes Gerber files for BFO,IB, TR, but not yet the PI PCBS which are what I'm interested in - and specifically first the PI4.
Would it please be possible to post the PI Gerber files?

Many thanks

[6666]

http://www.silverdog.co.uk/shop/inde...path=35&page=2

You can get the pcb's from silverdog for the IB, BFO and Probe projects.

[GoldenKiwi]

http://www.silverdog.co.uk/shop/inde...path=35&page=2

You can get the pcb's from silverdog for the IB, BFO and Probe projects.

Hi, many thanks for the link. Unfortunately I have zero interest in IB, BFO or the Probe projects.
Page 255 sais Gerbers for all PCBs would be available on the itmd link, hence I hoped I could get the PI Gerbers.
If so, they would be very much appreciated.

Kind regards
GK

[Qiaozhi]

Hi, many thanks for the link. Unfortunately I have zero interest in IB, BFO or the Probe projects.
Page 255 sais Gerbers for all PCBs would be available on the itmd link, hence I hoped I could get the PI Gerbers.
If so, they would be very much appreciated.

Kind regards
GK

The PI Gerber files are here ->
http://www.geotech1.com/forums/conte...4-gerber-files

[GoldenKiwi]

Fantastic thankyou Qiaozhi! Very much apreciated!

[6666]

Hello George or Carl the link to the gerber files no longer works
I get a message as below
6666, you do not have permission to access this page. This could be due to one of several reasons:

1. Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
2. If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

[Qiaozhi]

Hello George or Carl the link to the gerber files no longer works
I get a message as below
6666, you do not have permission to access this page. This could be due to one of several reasons:

1. Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
2. If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

I cannot see a problem with your account, and the links to the Gerber files are definitely OK as I've just checked them.
Please try again.

[6666]

No good, when I click the link in post 6, I get the error message
also when I click the heading for book 1 on main forum page I get the error message
but when i click book 2 it takes me to amazon.

Also from memory there used to be a heading that was called articles or something like that, and in there were gerbers and hex files, but not now

[WM6]

No good, when I click the link in post 6, I get the error message

The same with me.

[6666]

Thanks WM6

[Qiaozhi]

The same with me.

Is this a problem for everyone or just a select few?
I cannot see anything wrong with either 6666 or WM6's accounts, and the permissions on the link to ITMD Revision 1 seem to be correct. The only thing I noticed is that both 6666 and WM6 are in a primary user group called "VIP", which I think happens automatically when your post count gets over 1,000. I am in that group as well, but am also an administrator, so this may override any permission problems.

UPDATE:The problem is associated with the VIP user group. I created a new user and was able to view the link without any problems as a "registered user", even with zero posts. I then changed the user group to "VIP" and received the no permission message.
I have now switched 6666 and WM6's accounts back to "Member", so hopefully you can now get access to the link. I also checked Ivconic's account (as I suspected he was also a VIP, which he was) and have switched that back to "Member". If anyone has the same problem, please let me know.
Still cannot see why the VIP user group is an issue.

[WM6]

I have now switched 6666 and WM6's accounts back to "Member"

Now the page opens without blockade.

[6666]

Thanks, the link works now and I can also see the articles heading.