PCB for Arduino pi in UK?

[Bobman]

Has anyone ended up with a spare pcb in UK before I order the minimum of 5 from Jclpcb please? I have tried 'diy detector' here but no reply.

[MartyJ1963]

Hiya Bobman, I just checked Andy's (Silverdog) DIY Detector site for you and it says ''Not enough stock available''. Regards, Marty.

[Bobman]

Thanks Marty, I have just ordered 5 boards (minimum order) from JLCPCB China and they should be on their way. Amazing service and very cheap not worth the hassle of home built boards at all! Regards Bobman.

[MartyJ1963]

You'll be very pleased with the results your finished detector will give you. Me and my partner think it's a great little detector, good depth, ease of use, nice audio etc, and George did a great job designing this little beauty! Don't be in a rush to build it though or you'll easy cock things up lke a few of us Geotechers did, Lol. Build it in stages, as per the build file, and check and confirm each stage before you move on to the next. It doesn't take that long to build so even taking your time you'll be up and running in no time. The extra 4 boards you have could always be sold or you may be that pleased you'll want to make another,,,Like me!, Lol Regards, Marty.

[Hansvandenelzen]

Thanks Marty, I have just ordered 5 boards (minimum order) from JLCPCB China and they should be on their way. Amazing service and very cheap not worth the hassle of home built boards at all! Regards Bobman.

Hi Bobman, do you have a spare board now? I would like to buy one or two. If not could you send me the gerber files, so I can order one myself.

[Qiaozhi]

Hi Bobman, do you have a spare board now? I would like to buy one or two. If not could you send me the gerber files, so I can order one myself.

The Gerber files are here -> Arduino Nano Pulse Induction Metal Detector Project - Published March 2021

[Hansvandenelzen]

Thank you Qiaozhi. I ordered the book on Amazon.

[Bobman]

Hi Hansvandenelzen, I do have a couple to spare if you still require them. Very high quality and build up really well. JLCPCB gave me a discount so ?3 each plus postage would cover the costs I think, I assume you are in UK?

[Bobman]

It,s that spell check again!

The ?3 was ?3 when I typed it!

[Qiaozhi]

The ?3 was ?3 when I typed it!

It's a Vbulletin problem. We know about it.
Write gbp instead of the pound sign. e.g. 3gbp.

[Hansvandenelzen]

I understand it was 3 gbp. I have sent you a personal message

[wilfnano]

Hi Bobman, did you sell both the boards? I'd like to buy the last one if you still have one spare?

[Bobman]

Hi Wilfnano, I do have a board spare. If you live in UK then I can post it but elsewhere the postage kills the deal with China sending 5 boards for the same or less than our overseas postage! Let me know if interested.

[yoyo27983]

Thanks Marty, I have just ordered 5 boards (minimum order) from JLCPCB China and they should be on their way. Amazing service and very cheap not worth the hassle of home built boards at all! Regards Bobman.

Can you share the project on JLCPCB so I can order a few boards?

[Hansvandenelzen]

The Gerber files are here -> Arduino Nano Pulse Induction Metal Detector Project - Published March 2021
You can order the pcb's on https://jlcpcb.com