Problem with my baracuda

[dav62]

Hello all
I'm french and was already on your forum there is some time
I detected in France with xp gmaxII
jai has resorted to the contruction of my pulse detector inductioin there some time already
jai here has bought a kit silverdog's problem but it has not yet fonctione pay attention to components
my 23 turn coil and 0.5mm 1.2 pensse that men but not enough inductance on this one but even with small coil POUEr trying it should work??
diet have a 11 volt lipo was the opening of the switch there is not any sound of bipbip'm really disappointed because I had one e realization of aaz work very well with coil 1mx1m
I do not have a measuring points on the pcb is not the forum desoler
could you tell me because I know that among you are beefy in electronic of
desoler my English but google reflecting
thank you in advance to you : Rolleyes:

[homefire]

Yep, Translator programs can make a red barn black. Take your time and do best you can. As stated on the Thunting.com site your inquired the same, it is best to build in Blocks. Get the power up and running. Check that it's working. This only takes a VOM. Next stage, Do the Preamp Stage. All you need to know is the right parts put in place and is the Chip getting power.

Believe it or not you can check that too with a VOM. Output pin should be High or low with a target on coil. Tell me when your done with that!

[dav62]

Hello there

thank you to you for your help
thank you my baracuda fonctione correctly now, what have the best reel for him
jai for a flat coil has'm a forum member with a flat coil thread .... detected 35 cm a video on you tube but not found