Help to solve my baracuda's problem

[kt315]

and surf pi (that modded) and barra and hammerhead - all have SAT ie non-motion working. only some people do not
wish to notice this fact, ignore it and delete this part from schematics. because maybe they are newbies, dummies, I do not know...
papa alex wrote on bara schematic by red REMOVE. and all people removed SAT reset without tiny doubts.

blind squirells those people are

[Qiaozhi]

The MiniPulse Plus can also be made non-motion by swapping over C15 and R29.

[Silver Dollar]

Do you mean exchanging places of C15 and R29? It might be a cool mod to switch between either config...

[Qiaozhi]

Do you mean exchanging places of C15 and R29? It might be a cool mod to switch between either config...

Yes, that's correct.

[jladre]

papa alex wrote on bara schematic by red REMOVE. and all people removed SAT reset without tiny doubts.

can you share what is this parts for the non motion mode for baracuda and how to make it work?

[skylly]

papa alex wrote on bara schematic by red REMOVE. and all people removed SAT reset without tiny doubts.

can you share what is this parts for the non motion mode for baracuda and how to make it work?

I think kt315 refers the Q5 parts on bara schematic.

[skylly]

use fat coaxial multistrand cable.

although my line is a little thin, but indeed multistrand and very good shielding of the metal unresponsive.