Bara sensitive to motion. How to solve that problem?

[Impulse]

ok so i thought i had sorted the movement issue but it is still there im using mic coax and it is cable tied to a carbon fiber shaft (it cannot move) even if the whole set up is out side and a meter above the ground it still beepbeep at the end of each swing also if i roll/twist the coil or move up and down? any ideas?

[sinclairuser]

not trying to be q **** here, but i suggested this ages ago.
one thing we ALL learned about the baracudda is that it is very sensitive to coil movement, and the more shielding used the better, and that means encloseure coil and cable\coax.
typed on android keypad utter ****e.