Announcement

Collapse
No announcement yet.

field test unit no 001 "model T"

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Originally posted by robby_h View Post
    What is the point if we have to wind the gain back!!!!!!! And I remember you saying that the QED worked just as well with low Q coils. You change your arguments like most people change their socks!!!!

    For the umpteenth time, there is a difference between waving a coil over well blended ground at some test site and over typical variable gold field ground!!!
    I want a response from patches junior please not a parrot!!!
    Ps the coil I used WAS used over some typical gold field ground!!!!!!!!!!!!!!!

    Comment


    • Originally posted by PATCHES JUNIOR View Post
      I had a coil that was made from a old crystal radio antenna that was better than the spider "would" coil you used. It detected gold down to 4 meters deep. Prove me wrong.

      Plus what happened to the detector this thread was named after
      field test unit no 001 "model T"
      Please be kind enough to answer these questions i asked you in a previous post thank you!
      "Doug, Doug, Doug. Moodz has not even tried this coil on a detector yet!'
      If I don't know the answer to this then how would you know?
      However do agree with me that coil losses caused by : distributed-capacitance losses,skin effect,proximity effect,eddy-current losses in neighboring objects can be reduced by using spider wound coils? ie do you believe that higher Q coils in metal detectors are desirable? If not could you be so kind as to explain why.

      Comment


      • Originally posted by Doug2 View Post
        I want a response from patches junior please not a parrot!!!
        I see you usual ignorance is coming to the fore again Doug. Robby_H is just a little too smart and logical for you so, as usual, your only recourse is to attempt to belittle him?

        Ps the coil I used WAS used over some typical gold field ground!!!!!!!!!!!!!!!
        And so your gut feeling was that this coil was better ;-)

        Tell us all about the rigorous testing processes you went through to reach your conclusions Doug, and define the performance parameters that were so much better! Now this will be interesting!!

        Comment


        • Originally posted by Doug2 View Post
          I want a response from patches junior please not a parrot!!!
          Ps the coil I used WAS used over some typical gold field ground!!!!!!!!!!!!!!!
          You turn every discussion into a farce!!! You're like a child who reads a few words and then pretends to know it all.

          Someone once said "Never argue with an idiot, they will drag you down to their level and beat you with experience". That's you Doug so please go away and stop bothering the grown ups!!

          Comment


          • Doug, I give free high tech answers to my mates. But guess what, you are not a mate of mine. So any technical questions you want answered are going to cost you. How much are you willing to pay?

            Comment


            • Originally posted by PATCHES JUNIOR View Post
              Doug, I give free high tech answers to my mates. But guess what, you are not a mate of mine. So any technical questions you want answered are going to cost you. How much are you willing to pay?
              Why would i pay someone who clearly does NOT know the answers to my questions? Now prove me wrong!l Many folk here i am sure would be interested in your thoughts on the relevance or otherwise of coil Q and Pi detectors and the pro's and cons of spider vs bundle wound coils.

              Comment


              • Originally posted by robby_h View Post
                You turn every discussion into a farce!!! You're like a child who reads a few words and then pretends to know it all. Someone once said "Never argue with an idiot, they will drag you down to their level and beat you with experience". That's you Doug so please go away and stop bothering the grown ups!!
                Typical response from someone who claims his only association with a certain company is that he gets their newsletter and who has posted lies about me on other US forums!!!! Its the typical response from someone who represents i believe a vested interest and will do all in his bird power to preserve the detector market status quo! But the fact remains that the spider wound mono performed better than any commercial coil in the field over typical gold field ground and that is all that matters!!! What a poor show it is when you have to cover for people like Patches Junior!

                Comment


                • Why the antagonism to Moodz? As Carl would say he is not hurting anybody or any company and what he is doing will stand or fall on its merits which will be decided not by Moodz but by the users and ultimately the market!None of you have his circuits or have any idea of his signal processing methods or the results of any field trials! All you have is what Moodz has posted! So any negative comments in my view have little or no technical merit or validity and are purely speculative or are more likely an attempt by those with a vested interest in maintaining the status quo and are directed to trying to damage his reputation or discredit him either directly or by association!

                  Comment



                  • http://www.youtube.com/watch?v=UaHeqIXDKaM
                    Must have been amateur hour at coil trek ... Probably the plonker team on shift when they made that one ( ie Robby , patches an his little wannabe peter99 ... )

                    facts are if you bundle wind or basket weave a 45 cm coil which is what I made and stick it in a pizza box none of you will be able to tell the difference on depth or sensitivity.

                    Comment


                    • Originally posted by moodz View Post
                      facts are if you bundle wind or basket weave a 45 cm coil which is what I made and stick it in a pizza box none of you will be able to tell the difference on depth or sensitivity.
                      If you are comparing your coil in a Pizza box with a Pizza Hut Meat Lovers Special also in a Pizza box, I can believe you will not be able to tell the difference on depth or sensitivity. I don't think your mate DougAEGPoof will be able to tell the difference either!

                      Comment


                      • Thank you for your answer and effort Robby_H.



                        Ok, but I haven't read the real significant reason, why the Moodz coil (the spider wound coil shown), when shielded would outperform a ML coil. All I get is an indirect indication of the fact.


                        Forget the known facts like proximity effect, skin effect, lower capacitance, coil resistance..
                        Next try.
                        Who is smart enough?

                        Cheers,
                        ^sif

                        Comment


                        • Being accused of being one of them.....I would wonder what that is.........and WHY asking a simple question causes a head full of headfr----cks,,,,Not hard to figure it out, me thinks

                          Circus is in town I would say for toooooo long.......and have overstayed and expressed their negative propaganda.

                          All we hear is....Blaaaaa....Blaaaaaaaa.Blaaaaaaaaaa.

                          PS, the best detector in any field is the actual physical unit being used at present (TODAY), with or without positive results,,,,,attached with supportive documented data....Negative or Positive, let it bee.....Not let it be decided on a few min----nute individuals...

                          STOP being half a-s-s-s-s, semi-encrypted, Bu****ttte contributers that means nothing ATM, past and present.

                          Enough said

                          Sid

                          Comment


                          • Please ignore sido and continue the job as usual!
                            Maybe more harder and more controversial this time.
                            ^sif

                            Comment


                            • Guess there is a new "patent" on the way. Something deepest ever

                              Comment


                              • Originally posted by Doug2 View Post
                                Coils are already far too expensive!Spider wound or basket weave coils would be vastly more expensive for the reasons you describe.

                                Doug here is a partial quote from Moodz on your forum. I took out about half of it so you will not start crying about your copyright crap.

                                Doug .... I made this coil because it is easy and cheap to make ...and a coil can be completely manufactured in around half an hour to an hour plus 24 hours to cure. I never said it was better than a commercial coil except that I can make em cheaper ... Reasonably I could sell these at say 100 bucks ... Which is fair to all. Moodz

                                So you sticking by your own words on the price and difficultly of building, or you calling Moodz a liar?

                                Comment

                                Working...
                                X