Announcement

Collapse
No announcement yet.

Problem with Gary's Pulse-2

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Problem with Gary's Pulse-2

    I built Gary's Pulse-2 with mono coil.But when i connect the coil and then power it will be short circuit.Please help me.

    Thank you.

  • #2
    سلام

    رگلاتوری که استفاده کردی چیه؟
    1117A?
    1117?
    ...

    Comment


    • #3
      lm317

      Comment


      • #4
        راستی چقدر تو این زمینه کارکردی؟اگرخواستی بیشتر با هم در تماس باشیم.

        Comment


        • #5
          Hi

          I canot find REG1117A .

          can change with another voltage regulator like LM317 or not ?

          please help because i make Gary's detector pcb but canot find only this part.

          Comment


          • #6
            HI

            in this address compare REG1117a with LM2940

            Http://analog.chipfind.ru/serch.htm?s=REG1117A

            I think maybe can use LM2940 for REG111A.

            Comment


            • #7
              Excuse me this address is true:

              http://analog.chipfind.ru/search.htm?s=REG1117A

              maybe can find this part in tehran.

              Comment


              • #8
                Originally posted by sisco View Post
                Excuse me this address is true:

                http://analog.chipfind.ru/search.htm?s=REG1117A

                maybe can find this part in tehran.
                Why don't you just order the REG1117A From Me.
                Than you will have the Proper Part.

                [email protected].
                PLEASE Put "Electronic and REG1117A" in the Subject Line.

                Take care.....Gary

                Comment


                • #9
                  REG1117A (Problem with Gary's Pulse-2)

                  Hi ALL : I think LM1117A will do the same job as REG1117A cause both of them are low drop out voltage regulator but not just the said LM317.- Anyway ask GARY at Chemelec, I can tell he´s very kind.- Best regards.

                  Comment


                  • #10
                    Where is Gary?

                    Does anyone know anything about Gary.
                    I had send him a few emails, but not answer.
                    Nelson


                    Originally posted by EA7DWK View Post
                    Hi ALL : I think LM1117A will do the same job as REG1117A cause both of them are low drop out voltage regulator but not just the said LM317.- Anyway ask GARY at Chemelec, I can tell he´s very kind.- Best regards.

                    Comment


                    • #11
                      Hi Nelson, Sorry, I Never Recieved your Email.

                      Comment


                      • #12
                        Bandido II request

                        Ok Gary i just send an email to you with my request.
                        Regards
                        Nelson


                        Originally posted by chemelec View Post
                        Hi Nelson, Sorry, I Never Recieved your Email.

                        Comment


                        • #13
                          Would a LM1117T-Adjustable Low drop out regulator work?

                          Comment


                          • #14
                            Originally posted by Unregistered View Post
                            Would a LM1117T-Adjustable Low drop out regulator work?
                            I Don't have one to Test it, But PROBABLY YES.

                            Comment


                            • #15
                              REG117A

                              Originally posted by sisco View Post
                              Hi

                              I canot find REG1117A .

                              can change with another voltage regulator like LM317 or not ?

                              please help because i make Gary's detector pcb but canot find only this part.
                              I use KIA7810A and it is work.You redesign for (2V dropout) KIA7810A or UA7810.

                              Comment

                              Working...
                              X