plz help pulse star II coil

[freser]

I've pulse star II with its four coils:1mx1m,45",28",17".....
but even with 2 years of experience,i wonder if there is any possibility to change these coils by an antenna or something similar but not a coil,bkoz 1mx1m is very large and detects every tiny thing in large area........so pla could anybody offer a help.............thanks in advance

[freser]

I've pulse star II with its four coils:1mx1m,45",28",17".....
but even with 2 years of experience,i wonder if there is any possibility to change these coils by an antenna or something similar but not a coil,bkoz 1mx1m is very large and detects every tiny thing in large area........so pla could anybody offer a help.............thanks in advance

[Great_Alex]

Hey Freser

you should use of the standard coils that designed for PS2
the size of the coil that you choose is depend on depth and size of the target , for deeper target you must choose bigger coil , you can't escape of this fact till you change your detector with some other brand not PI detctor.

if you don't want PS2 detect the small piece of metals try higher sampling delay 2,3 or 4 , even you can tune your detector when the coil is on the ground then you take the coil up and start to search .