My DIY project DIY Wiring

[davros]

Hi Silver dollar
I didn't know they sold just the coil housing ,i knew they sold them with coils so this is new to me .
I also noticed they sell the bolts and nuts ..
Oh i am going to have to think about this now as i didn't know they existed .
I am thinking there are 2 sides to it and clip together ? or do you have to still have to resin your coil in if the bottom is just an opening ?
Either way thats an idea ...i want to make another 2 metal detectors so a few of those will come in handy .
Thanks for the info !

[Silver Dollar]

Here's the bigfoot housing I bought before I knew they had the 10 1/2" for the same price.

It is 2 sides that you glue together. Making the coil solid with epoxy inside is probably a good idea..

[davros]

Here's the bigfoot housing I bought before I knew they had the 10 1/2" for the same price.

It is 2 sides that you glue together. Making the coil solid with epoxy inside is probably a good idea..

Do you know the type of epoxy thats good to use on these things .

I really like casing that would make life easier when making these things .

I am still thinking about it if i should try and make the casing shape wise out of wood or that thick plastic knife kitchen boards or just mold the shape with resin.

This guy is most likely well known great DIY coils and casing ideas

http://www.youtube.com/watch?v=EWwWE3YpEqA