Embarrassing mistake... PI1 builders please read!

[Carl]

I have mislabeled some caps on the schematics, by a factor of 10. They are:

C8, C24, C25, C26 - should be 10nF, not 1nF
C9, C17, C18 - should be 0.1uF, not 10nF

Sorry 'bout that, I will get corrected schematics and a new parts list posted ASAP.

(Thanks again, Tom!)

- Carl

[Chris]

Re: Embarrassing mistake... PI1 builders please read!

Hi Carl

I don't know but it looks that you have a big mix up. To which schematic are you refering? I'm asking because I wanted to update the new value to my printed copy (Rev B - 01Sept2001)but notice that this are already the correct (according your new changes) values except for C17 & C18 (both 0.47uF).

Chris

[C.Pruysers]

Re: Embarrassing mistake... PI1 builders please read!

Would it not be better to wipe-out all info on your web-site pertaining to the PI-1 and start posting the new revised and corrected version of the detector ? With all the corrections so far nobody knows where he is up to. Just a suggestion ! Kees

[Carl]

Re: Embarrassing mistake... PI1 builders please read!

>Would it not be better to wipe-out all info on your web-site pertaining to the PI-1 and start posting the new revised and corrected version of the detector ? With all the corrections so far nobody knows where he is up to. Just a suggestion ! Kees

Yes, everytime I post a new article, schematics, or PCB, the old ones are pulled. Everything is labeled with rev numbers too, so you can easily tell if you have the latest.

I really apologize for the slow pace of this project, but I have a ton of other things going on, and it is low man on the totem pole right now.

- Carl