HH1 DIY Rev D PCB

[petere]

I am a little out of my depth here. Can someone tell me if I am on the right track with this pcb please. I still have to drill the holes but would like some confirmation before I go any further. Any advice regarding vias would be appreciated.
Thanks

[6666]

You can use pcb pins for vias, what did you use to make the silk screen ?

[petere]

I used a mirrored print from a laser printer and rubbed acetone on the paper which transfers the print onto the board. The paper i used was a bit to thick & it didn't transfer to well. I saw it done on youtube,
https://www.youtube.com/watch?v=M_m1YBTzgvY