HammerHead

[Ray]

Carl I was happy to receive the pcb yesterday in the mail. I was looking it over for parts locations and could not find a spot for C10 the 1000ufd cap. I assume it goes in the area next to Q3 have not traced it all out yet to be sure.l
The board looks great and well made.
Ray

[Carl-NC]

Re: HammerHead

C10 was too big for the top side, so my intent was to put it on the back side, laying down, with leads bent 90º to the holes. I think I marked one of the holes with a "+" for polarity.

- Carl

[Ray]

Re: HammerHead

Thanks Carl.
Ray