Announcement

Collapse
No announcement yet.

BOM for hammerhead

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BOM for hammerhead

    been reading this forum for several weeks and I'm trying to decide on which pi to build..
    I've looked over the schem's and placement pdf's.but I'm unable to find a list of parts for the HH..
    I could read the schem's and make a list myself but i'm thinking that the errors/omissions I make may have an out come on the final product..

    after reading all the posts on coils and making,I believe that a DD rectangle is in order.(easiest to wind? but maybe very tough to tune?)

    i'm in the process of a seperate folder for Reg's post's on tweak's(THANX REG)
    which has been very enlightening..as well as the others..

    I understand that the VCO model once properly running and tuned will produce the wee/woo ,where as the non-VCO will not...Correct??

    I've fooled with electronics a fair bit,once even making a dual channel 555 timer curcuit to be used for salmon fishing(the black box).
    I designed and made from scratch..( many 555's released their smoke while trying to get them into a 2.5/.3 min on/off cycle)
    so I think I have what it takes to construct a HH...

    the coils and tuning may take a bit...BUT I'M VERY interested.
    I see that lastest rev is C?
    Is there somthing I've overlooked ?
    Goals for the HH would be salt beach's as well as relic area's.
    Thanx.Gg
Working...
X