PCB just arrived, some question

[gls]

Hi there, Carl has shipped to me the circuit board and looking at it seem very professional.
Now I have to mount every parts. My only doubts are in the function of (almost) every pot, I decided to mount all of them on the control panel, but labeling them cause me fear
Can you provide me some hints?
Example:

R2 = ???
R3 = ???
R4 = ...

ecc ecc

Thanks in advance, gls

PS: Sorry for my english, I know this is not very clear

[Molzar]

Pot Idents

Hi,

R2 = Pulse Frequency
R3 = Pulse Width
R31 = Threshold
R34 = Auto-Track Speed
R35 = Sensitivity
R41 = Volume
R42 = Main (First) Sample Delay
R45 = Secondary Sample Delay
R46 = Sample Width (First and Second)

R18 & R23 are calibration adjustments that should probably stay on the PCB as once they are set there is no need for further adjustment.

You should carefully read the artical and all the posts before starting.

Good Luck!

Molzar

[gls]

Thanks 1000 Molzar!