And so it begins...

[6666]

moorejl57 when you made the former, how did you mark out the distance between the slots on the former ?

[moorejl57]

moorejl57 when you made the former, how did you mark out the distance between the slots on the former ?

I used the circular array feature where you set the number of copies, it automatically spaces the items. So I only drew one slot.

[6666]

I used the circular array feature where you set the number of copies, it automatically spaces the items. So I only drew one slot.

Thanks reply, that sounds like a handy feature so I will investigate it, thats the challenge with these programs trying to find out all the functions and features, cheers.

[surfdetector]

New question:

[ATTACH]46326[/ATTACH]

On stage 3, while installing components
1. C22 is ceramic disk vs. little white box type, not trying to nitpick, just want to verify substitution is OK

On stage 3, while adjusting TX pulse period and width, are these normal expected observations
1. set pulse period first, while setting pulse width observed that pulse period is also changing (settings are interacting)
2. pulse period is not completely stable (varying at a relatively slow rate (slow period jitter)

I realize that I am replying to an older post but I am trying to see in your image if you left a gap in your shield or not?
Cheers