TGSL EDU - My First Attempt!

[aliengravy]

Ok, ordered my TGSL - EDU from Silverdog on Wednesday night... he posted it Thur, and I received it today so 10 out of 10 for Silverdog! Brilliant service!

I have soldered it up this evening. And I'm left with some questions.

1. How do I know I have wired the pots the correct way... I.E what is more sensitive? what is less sensitive? More GB less GB...
2. I have wired a 100k pot between P1D P2D and P3D, I understand this is discrimination? Again what way should the pot be?...
3. What are the K1 K2 K3 pinouts on the board?

I will be winding my coil tomorrow so wish me luck!

Thanks everybody for all of your help!

[pillowmyford]

K1, 2 & 3 connect to the Discrimination switch J3.

K1 goes to pin 7 of U102b via R23.
K2 goes to gate of TR4.
K3 goes to pin 1 of U102a