Shielding the enclosure

[Daren]

Anybody has any any advices on shielding the plastic enclosure? I mounted TGSL in plastic box. I do have the copper stick-on shielding, but I don't know if it will make any difference?
Anybody tried this?
Thanks

[Koala]

Does this help

http://www.geotech1.com/forums/showt...-Pulse/page104

[Silver Dollar]

My original Bandito uses a metal face-plate but no shielding in the back of the box.
The coil connector is grounded on a metal plate though. I have heard it will quiet
down the noises with a shielded enclosure.

http://www.geotech1.com/forums/showt...095#post193095

I'd try a metal front plate and possibly ground the metal parts of the pots and a
metal plate for the coil connector but skip the enclosure unless it acts inconsistent
(due to EMI pickup).

[Daren]

I'll see how it goes, it the noise will be erratic then I'll try it. I don't want to rip it apart and stick the foil it its not needed...
Thanks.