Tgsl two tone and VDI

[Prospekteur]

1=Encoder (you need it for your VDI, isnt drawed in yet in your layout...check that out)
2=Backlight on/off (can also turned on/off in VDI menu with encoder)
3=VDI on/off

Look here for the encoder connection points;-)

http://img4.fotos-hochladen.net/uplo...wgtny3bel8.jpg

Encoder pin A to pin 2 on Arduino
Encoder pin B to pin 3 on Arduino
Encoder Button pin to pin 4 on Arduino
Encoder other Buttonpin and pin c to Ground on Arduino

[Virdi_248]

1=Encoder (you need it for your VDI, isnt drawed in yet in your layout...check that out)
2=Backlight on/off (can also turned on/off in VDI menu with encoder)
3=VDI on/off

Look here for the encoder connection points;-)

http://img4.fotos-hochladen.net/uplo...wgtny3bel8.jpg

Encoder pin A to pin 2 on Arduino
Encoder pin B to pin 3 on Arduino
Encoder Button pin to pin 4 on Arduino
Encoder other Buttonpin and pin c to Ground on Arduino

Hello again, I'm waiting for Hong Kong IC2 and LCD, I have not forgotten this thread, I will write again when I get home parts.

[Prospekteur]

I takes a time shipping the parts to me too. But when they arrived you will build a great detector.

[Virdi_248]

After three months of waiting and asking twice parts in China finally they arrived.

I mounted the plate and does not work well, it seems to me.

Assembly.

[Virdi_248]

doubts

LCD goes double volts.



I connected pins from LM308.

Which is correct?

A or B?






Video
https://dl.dropboxusercontent.com/u/..._221106729.mp4


sorry for translation

[Prospekteur]

Hi,

the connection "A" is good.

[Virdi_248]

works well at home, now I have to prove it on the field. I'm very happy. I'll post my installation files if someone serves. Thanks for everything and greetings from Spain.

[Virdi_248]

I leave my files for all who wish to use.

I do not use decoder. My LCD illumination is controlled by a switch. On/off only.

GEOTECH thanks especially to members

Prospekteur Darem.


TGSL EDU_Arduino_Vdi part 1.rar
TGSL EDU_Arduino_Vdi part 2.rar

Missing two libraries necessary for Arduino. They have to search for the network.
LiquidCrystal_I2C
MenuSystem


Coming soon will show a video. greetings

[jladre]

Hi Prospekteur and Virdi_248!, can you please send me the files including the code for this project.. I cannot download the filw which is posted in this tread.. My email [email protected]. thanks in advance

[jladre]

Disregard..i able to download it now..

[Tibuck19]

Does it need to be a Cmos Op amp, or can I use a regular op or a jfet op amp or some other common one ?

[Tibuck19]

Could someone verify the schematic and board layout to make sure it could work and if everything is in place right please. was done in Eagle, It is for XY signal to Arduino VDI.
Thank you
The Zip has all the schematic and Gerber's.

[Tibuck19]

These are the files from Eduardo1979, which is what I used to make the schematic and board layout.

[Gerain]

https://www.dropbox.com/s/4xtgxvy47y...L072.lay6?dl=0
I tried to dilute the fee for this scheme. For the first time it seems not bad.

[ovidiu]

Salut tuturor . Am urmat acest thread cu interes, mai ales pentru atașarea unui vdi la tgsl. Am si eu un tgls-edu si m-am hotarat sa fac si un vdi. Conform fișierelor lăsate de Virdi_248, am făcut totul, cu excepția codului arduino. Cand compilez am o eroare si nu stiu cum sa o inchei. Ma poate ajuta cineva va rog...
atasez fisierele .