Tweet
I will post these later today, for a limited time only. Go to:
http://www3.telus.net/chemelec/Bandito/Bandito.htm
http://www3.telus.net/chemelec/Bandito/Bandito.htm
-
-
-
Re: Bandito PCB and Overlay
dear Gary, I'm sorry, but why the JPG was used?
I think two-colour GIF is better way. imho.
attached PCB image of VOLKSTURM SS-1 proto.
Comment
-
Re: Bandito PCB and Overlay
My Scanner doesn't do Gif. And Files turn out VERY Large with all the other programs I have that convert my jpg to gif.
Converting this Bandito PCB of mine results in a 1.2 Mb file.
Sorry but jpg is best for me.Comment
-
Re: Bandito PCB, (JPG and GIF) and Overlay
OK, I figured it out for a gif and it is now available in both. But the JPG is definately more well defined for the same picture.Comment
-
Re: Bandito PCB and Overlay
By the way, that is my salt schematic
The salt mode worked ok, and you are able to balance to salt. However, you will also detect iron. No way around that.
Also the cap values you state I have verified with the caps out of circuit.Comment
-
Re: Bandito PCB and Overlay
Thanks Goodrat, for the info. When I saved the salt schematic I just saved the picture and didn't look who posted it. I'm not trying to take credit for anthing I didn't create, but thought I would put all pertant info in one place for those who are interested. But I should also put a "link" to the Schematic and Manual.
Take care.......GaryComment
-
Re: Shematic
Just looking for my 15 seconds of fame
Someone needs for figure out if it's possible to stop iron from getting detected in that salt mode. Otherwise, most would say it's useless anyway.
I have a switch poseted somewhere on here to use one switch for disc/auto all-metal/normal all-metal that I think is a good thing. I'm getting that switch this week to test.Comment
-
Shematic error?
Hello. To me seems there is an error in sheme"Bandido".On my the condenser C29 must be 10n.Sorry for bad English.Comment
-
Bandito Overlay 2
for builders...Comment
Comment