Bandido meter ?

[Driscoll]

Hi from France (it rain !),

Somebody knows how to add a meter to identify the targets on the bandido ?

Regards

[Rod]

Re: Bandido meter ?

Hi

See here :

http://www.thunting.com/cgi-bin/geotech/forum/view.cgi?action=message&forum=tech&message=4162

Regards

[Driscoll]

Re: Bandido meter ?

Splendid, but i have no more information about that !

[Marry]

Link is dead, please post Infos about to make (connect) a analog meter for the Bandido2
Thanks

[Marry]

A analog meter to identify the targets and a digital or analog meter for the deep, please

[Max]

Hi from France (it rain !),

Somebody knows how to add a meter to identify the targets on the bandido ?

Regards

Hi,
I don't think it's so useful to have cause disc in bandido is mainly intended as ferrous vs non-ferrous, anyway, can be done using signals at IC8 inputs and some op. amp. to mix them and giving a positive and negative signal referred to gnd then to use with a buffer to drive a central-zero 100uA meter or similar. Just to know if it's ferrous or not...not the real target composition.

Best regards,
Max