Bandido, Split PCB Design

[chemelec]

Here are my Revised PCB's and other Info.
A Revised Schematic and other info Still to come, Hopefully I will get it done this week.

http://www3.telus.net/chemelec/Projects/Bandido-Split/

[chemelec]

All the Info is Now Posted here:
Including a Revised Schematic.
(This Print Nicely on an 8.5 by 14 Paper)

http://www3.telus.net/chemelec/Projects/Bandido-Split/

Comments Welcome.

For Testing Purpose, You can Easily Make Jumper cables using the same Single Inline Pins (plugs) and Ribbon Cable.
This will allow testing with the boards placed Side by Side.

All Comments Welcome.

[nelson]

Bandido question

Hi Gary
Can you tell me your opinion about Bandido performance?
Long time ago i had plans to build one, but not shure of that, until i know if is good enough to replace my old TR840 Bounty Hunter. What do you think, can be this a good choise to replace my old detector?
Regards and thanks for your help.
Nelson

All the Info is Now Posted here:
Including a Revised Schematic.
(This Print Nicely on an 8.5 by 14 Paper)

http://www3.telus.net/chemelec/Projects/Bandido-Split/

Comments Welcome.

For Testing Purpose, You can Easily Make Jumper cables using the same Single Inline Pins (plugs) and Ribbon Cable.
This will allow testing with the boards placed Side by Side.

All Comments Welcome.

[chemelec]

Hi Gary
Can you tell me your opinion about Bandido performance?
Long time ago i had plans to build one, but not shure of that, until i know if is good enough to replace my old TR840 Bounty Hunter. What do you think, can be this a good choise to replace my old detector?
Regards and thanks for your help.
Nelson

Sorry Nelson, Your asking the Wrong Person.

I Have Almost "NO Experience with Any Commerical Metal Detectors". Never even Owned one.

I Think it works Good, BUT I Suggest you Ask the others on this forum for a REAL comparison.

Need to Detect a CAR Nelson?
My Latest Design this morning.

http://www3.telus.net/chemelec/Proje...p-Detector.htm

Take care.....Gary

[nelson]

Bandido MD

Ok Gary and thanks.
About the car detector is a nice project. I never think on the possibilities of that kind of detector. For shure this can be usefull for many aplications that i have in mind.
Regards
Nelson

Sorry Nelson, Your asking the Wrong Person.

I Have Almost "NO Experience with Any Commerical Metal Detectors". Never even Owned one.

I Think it works Good, BUT I Suggest you Ask the others on this forum for a REAL comparison.

Need to Detect a CAR Nelson?
My Latest Design this morning.

http://www3.telus.net/chemelec/Proje...p-Detector.htm

Take care.....Gary

[chemelec]

Ok Gary and thanks.
About the car detector is a nice project. I never think on the possibilities of that kind of detector. For shure this can be usefull for many aplications that i have in mind.
Regards
Nelson

Definately SIMPLE.
A PCB will be on the site SOON.

I Can Also think of Many other Applications and also Modifications for this.

PS: Email me Your Address and I'll send you that T/R PCB.

[nelson]

Car MD

Good morning Gary.
Yes, after i finish my TR locator, i ll give a try to that circuit, very interesting.
About PCB, firts of all many thanks for that value gif, my name and address are:

Nelson Lepe Téllez
Aristides del Solar 9067
Las Condes
Santiago
CHILE

Gary i m still interested on get the reg1117, because i want to make your PI metal detector. I have read all post about it, and everyone saids is a very good one, good deep and good stability.
I can pay thru master card or any other way accesible to me. Paypal i m not shure if works fine here. Any ideas?
Gary another question, i m looking to make a simple function generator, that can generate square wave from 1 hz to 500 hz.
This is to keep on my experiments related to Dr. Clark, who has been experimenting with this devices to kill bacterias, viruses and parasites, very interesting matter. If you like to know more about it, you can go to Dr. Clark web site http://www.drclark.net/

Many thanks and i ll talk later.
Regards
Nelson

Definately SIMPLE.
A PCB will be on the site SOON.

I Can Also think of Many other Applications and also Modifications for this.

PS: Email me Your Address and I'll send you that T/R PCB.

[chemelec]

Hi Nelson, Sorry But I Do NOT Accept any Credit Cards.
Basically I only accept CASH Money in USD.

that can generate square wave from 1 hz to 500 hz

.
Just use a 555 Oscillator, Like everyone else does.
But What a Waste of time this is, It Doesn't Kill Anything!
They doen't even have enough Voltage output to Penitrate the Skin.

This stuff is a Take-off of "TENS" Circuits, Which are simular but at a higher voltage. TENS Devices help reduce pain feeling by deadening nerves.

If you want the REG1117A, I'll put one in with the PCB for the T/R Locator.
And to make it easy, No Charge this Time.

Take care....Gary
*********************************************

Good morning Gary.
Yes, after i finish my TR locator, i ll give a try to that circuit, very interesting.
About PCB, firts of all many thanks for that value gif, my name and address are:

Nelson Lepe Téllez
Aristides del Solar 9067
Las Condes
Santiago
CHILE

Gary i m still interested on get the reg1117, because i want to make your PI metal detector. I have read all post about it, and everyone saids is a very good one, good deep and good stability.
I can pay thru master card or any other way accesible to me. Paypal i m not shure if works fine here. Any ideas?
Gary another question, i m looking to make a simple function generator, that can generate square wave from 1 hz to 500 hz.
This is to keep on my experiments related to Dr. Clark, who has been experimenting with this devices to kill bacterias, viruses and parasites, very interesting matter. If you like to know more about it, you can go to Dr. Clark web site http://www.drclark.net/

Many thanks and i ll talk later.
Regards
Nelson

[nelson]

Thanks

Ok Gary, well that´s ok about Dr. Clark experiments on 555 and so on...
Thanks Gary for Reg 1117A, but i want to make shure you get the money for that. I ll contact a friend of mine who knows much than me about how to pay trhu internet, so i hope you get the money very soon and also for shure i ll buy more than one Reg1117, because some friends whant that kind of detector
regards
Nelson

Hi Nelson, Sorry But I Do NOT Accept any Credit Cards.
Basically I only accept CASH Money in USD.

.
Just use a 555 Oscillator, Like everyone else does.
But What a Waste of time this is, It Doesn't Kill Anything!
They doen't even have enough Voltage output to Penitrate the Skin.

This stuff is a Take-off of "TENS" Circuits, Which are simular but at a higher voltage. TENS Devices help reduce pain feeling by deadening nerves.

If you want the REG1117A, I'll put one in with the PCB for the T/R Locator.
And to make it easy, No Charge this Time.

Take care....Gary
*********************************************

[chemelec]

Ok Gary, well that´s ok about Dr. Clark experiments on 555 and so on...
Thanks Gary for Reg 1117A, but i want to make shure you get the money for that. I ll contact a friend of mine who knows much than me about how to pay trhu internet, so i hope you get the money very soon and also for shure i ll buy more than one Reg1117, because some friends whant that kind of detector
regards
Nelson

I Bought 100 of these REG1117A and Basically My "Landed Cost" was $1.50 Each in Equivalant USD.

So Let me know How many you want and I'll send them in with that PCB.
This will AVOID Future Shipping Costs, And you can pay me later, (Some How) After you get them.

Gary

[nelson]

Reg1117A

Gary, if is possible i need two of them.
So please let me know where i should send the money. I think that secure global mail can be an option to me.
In advance many thanks
Nelson

I Bought 100 of these REG1117A and Basically My "Landed Cost" was $1.50 Each in Equivalant USD.

So Let me know How many you want and I'll send them in with that PCB.
This will AVOID Future Shipping Costs, And you can pay me later, (Some How) After you get them.

Gary

[chemelec]

Gary, if is possible i need two of them.
So please let me know where i should send the money. I think that secure global mail can be an option to me.
In advance many thanks
Nelson

I NEVER POST My Address on the Internet.
You will need to Email Me at: [email protected]

** PLEASE PUT "Nelson, Electronic" in the Subject Line.

All you need to do is just put $3.00, (USD), Wrapped in a piece of paper and send it to me by "Regular Postal Airmail".

There is No reason to send it by Secure Global mail.

I get letters from All over the world this way and in over 6 years, there have been NONE LOST.

[nelson]

Reg1117A

Excelent Gary, i email you to get your address
Thanks
Nelson

I NEVER POST My Address on the Internet.
You will need to Email Me at: [email protected]

** PLEASE PUT "Nelson, Electronic" in the Subject Line.

All you need to do is just put $3.00, (USD), Wrapped in a piece of paper and send it to me by "Regular Postal Airmail".

There is No reason to send it by Secure Global mail.

I get letters from All over the world this way and in over 6 years, there have been NONE LOST.

[WM6]

Helo Garry,

any air test of your excellent done Bandido split mod? Or even field test experience?

Can you explain your Bandido coil design? You use for shielding "PCB" Copper-coated plate? Probably only on RX? Intereasting solution,

I've thought about it only a few times, but what about gap on schielding?

Thank you for your efforts, I hope you enjoy it.

[chemelec]

WM6, Sorry, no air tests.
I only created this Split Board, Just to see if I could do it.
I Did it, And it does work OK.

However, I also believe my Coil is VERY POOR done.
I was in too much of a rush to just get it done.

But Either way, I just prefer my PI Detector.
(Descrimination isn't important to me.)