Problem in the coil TGSL

[asdfasdf]

I do the first coil as dis crib in the digram with dimension 255mm*137mm with TX 98 winding and RX coil with 107 winding and shielded with Aluminum foil and fixed on board the set dos not activated

pleas tell me where is the problem and how to solved it in details

with my best regard to you

[asdfasdf]

I wont help

Please I want the name of the article, which is working to shield the coil. What is the name the wire naked is it copper or aluminum or iron or what ...

please i want help

[dfbowers]

I do the first coil as dis crib in the digram with dimension 255mm*137mm with TX 98 winding and RX coil with 107 winding and shielded with Aluminum foil and fixed on board the set dos not activated

pleas tell me where is the problem and how to solved it in details

with my best regard to you

What do you mean by "set does not activated"? Do you mean that your project does not work?

If you want detailed help troubleshooting your project you must provide more detail on your problem.

To start with, does your oscillator work? Checking your voltages will give you a clue. Particularly, -5v.

Aluminum foil shields work just fine as long as you do not make a complete loop.

[dfbowers]

Please I want the name of the article, which is working to shield the coil. What is the name the wire naked is it copper or aluminum or iron or what ...

please i want help

I use bus wire. It's just tinned copper wire. I don't think it's too important as long as it's conductive and not too thick.

[asdfasdf]

This is the Board

[asdfasdf]

This coil Sizes

Are they true or false

[asdfasdf]

0

[asdfasdf]

I want to help

Check the Board as attached pictures