Announcement

Collapse
No announcement yet.

very good sensitivity stuart1 with...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • very good sensitivity stuart1 with...

    With a coil of 18,8cm diameter and the 27 initial turns, with enamelled copper cable of 0,7mm diameter.

    I detect 1cent european coin (1,5cm diameter!!) at 25,3cm (measured) of depth.

  • #2
    stuart 1 non works

    hi

    i have tested my stuart today bat non work very well !!!
    i don' t have use original pcb bat i have redraw it with schematic i have use 741 op. amp. a detect 1 euro cent at 15 cm. !!!
    whit the lm 318 op. amp. i detect 1 euro cent at 1 cm .... no good !!!

    yuor schematic and pcb is original ??

    sorry for my english, tnx ciao.

    Comment


    • #3
      please, use the lm318p is really faster and better quality than 741

      Comment


      • #4
        thnx
        i have replace 741> lm318 p, i use D1=1N5817, X1=32, ...KHz, IC4=4066, TR4-TR5=bc558, C1 2200uF, C2-C7-C8 =100uF, C3=10uF, TR1 IRF740; the boost supply is ok (15v), my coil diam. 19 cm, 27 turn.
        I detect
        1€ cent it -18cm
        50€ cent it -25 cm
        bay

        Comment


        • #5
          ur welcom

          Comment


          • #6
            i have tested my new coplanar coil : i detect 50€ cent at 30cm, 10€ cent 26cm, 1€ cent 20 cm (not 25 cm!!!), 30x10 cm metal +80 cm. The stuart 1 M.D. is good bat my tiny PI metal detector is strong .........(50€ cent +40cm.).
            ciao. tnx

            Comment


            • #7
              i have enough ear for listening how increase the clicking rate at 25 cm with a cent. May be, I'm lucky

              Comment


              • #8
                Coplanare coil

                thanks for the information. he tries to use a Coplanare coil mine has internal diameter of 22 cm and 31 coils, outside 32 cm diameter. I have spun since 0,5 recluse.

                Comment


                • #9
                  search coil shield

                  Is the search coil shielding is needed in Mark Stuart EE tresure hunter ?

                  Comment


                  • #10
                    Mr.

                    Not really. Depending on your search intermitence condition (soil, RF disturbance etc.). What for MD is your Tiny PI MD?

                    Comment


                    • #11
                      clarity in coils

                      Originally posted by Unregistered View Post
                      thanks for the information. he tries to use a Coplanare coil mine has internal diameter of 22 cm and 31 coils, outside 32 cm diameter. I have spun since 0,5 recluse.
                      whats coplanar coil means here, is it spiral coil????

                      Comment


                      • #12
                        My Tiny PI is in ....http://www.pulsdetektor.de

                        My coil is to spiral.

                        Comment


                        • #13
                          Has any one tried cutting the stages on the 4040 to bring the sampling down? The original schematic is set for a sample rate of 50us and uses 5 stages of the chip. At 10us per stage you can bypass one stage to bring your sample rate down by 10 us. With a hot coil it may find small gold.??

                          Comment


                          • #14
                            Originally posted by Unregistered View Post
                            My Tiny PI is in ....http://www.pulsdetektor.de

                            My coil is to spiral.
                            THIS SITE SHUTTING .YOU KNOW HOW HEP GO SITE,PLEASE

                            Comment


                            • #15
                              Your link worked for me.

                              My German is no Bueno!

                              Comment

                              Working...
                              X