Gold Bug 2 Plug wiring

[Hodad]

I need help! The wires got pulled out of my Gold Bug 2 and I need help on where to re solder them. I was surprised that there are only two wires from the coil, Green and Orange with no shield or ground wire. Does anyone have the info. on this? Thanks

[bklein]

Try each way. Let us know if it makes a difference. No risk to the electronics.

[bklein]

Try each way. Let us know if it makes a difference. No risk to the electronics.

Sorry for my dumb answer - I thought it was simpler than it is. I have a GB2 that supposedly is one of the earlier ones.
Attached are photos of the plug wiring.
Referring to numbers embossed on rear of plug:
1 - n/c
2 - red
3 - ground of plug and red's shield
4
5
6 white
white's shield is center pin (4 or 5?)