Desire orientation to increase the size of the coil of Bounty Hunter II

[entrajaviergeo]

Hello, my name is Javier, a resident of the Mexican Pacific, I want to apologize for my bad English prior, use google translator.


For these lands are home treasures legends and stories which prompted me to study on metal detection equipment, for now I have a bounty hunter II.Annex photographs at the end.


I realize that is a team whose use is focused more on the beach and not have to put another coil plug, however, I have experience in electronics and have met the basic material as the magnet wire (here so called) and other components to build a coil.


He disarmed the bounty hunter II, and I've found that are five printed card cables to the coil, are labeled with colors, but two of them are labeled as Txx and SHIELD.


Desire orientation to increase the size of the coil, the current I measured and is about 8 inches (7, 3/4 or so), in an announcement from the company selling it said that you can attach a 10-inch.


That coil type recommended for this equipment?, What would its construction methodology?


In advance thank you very much for your attention to this message


http://www.flickr.com//photos/84887416@N02/show/

[Carl-NC]

Building a coil for this will be difficult. If you want a 10" coil, I suggest you look for a used one on eBay. If I recall, this model can also use older White's coils, although you may need to make an adapter. I've seen adapters on eBay as well.

[Dave J.]

Javier, la compania Bounty Hunter en este era esta ubicado en El Paso, Texas, y casi todos aqui entendemos espanol. La fabrica de la marca Bounty Hunter tambien somos de las marcas Fisher y Teknetics.

La rueda BH de 10-inch que vendemos no es lo mismo que vendiamos antes 2004 porque los circuitos cambiaron y no mas podian usar las ruedas de 10-inch hechos de antes.

Lo mejor consejo que ofresco es que comprar maquina nuevo con rueda mas de beneficio de sus circumstancias. Nuestro telefono EUA 915-633-8354 y explicarse a la recepcionista sus circumstancias y de que esta en busca.

Presunto que Carlos dueno de este foro anidara su posto con direccion de White's su empleador. Esta bien, Carlos y yo nos conocemos y "que la mejor orferta gana".

--Dave J.

*******************en ingles, para todos*************

Javier, Bounty Hunter these days is located in El Paso, Texas, USA, and nearly everyone here understands Spanish. The BH factory also produces metal detectors under the Fisher and Teknetics trademarks.

The 10 inch loop we sell nowadays is different from the one prior to 2004, we revised the electronics and they can't use the older loops.

The best advice I can give you, is to buy a new machine with a searchcoil best suited to your circumstances. Our telephone is USA 915-633-8354 and explain to the receptionist your situation and what you're looking for.

I presume that Carl, the owner of this forum, will add a post giving directions how to contact White's, his employer. It's okay, Carl and I know each other, and may the best offer win.

--Dave J.