Garrett Deep Seeker Cross Fire 8.5"

[satdaveuk]

Hi
Anyone got the spec of this coil plus plug pinouts, It was originally fitted to the T4 but has had exstension lead from another coil just added on by twisting the wires with a plug for the 250 I was assured it working OK but prefer to check it out best as possible before moving it on as I have no use for it.
The chap said its had very little use and by the looks of it seems correct.

Thanks in advance

[satdaveuk]

Hi
Anyone got the spec of this coil plus plug pinouts, It was originally fitted to the T4 but has had exstension lead from another coil just added on by twisting the wires with a plug for the 250 I was assured it working OK but prefer to check it out best as possible before moving it on as I have no use for it.
The chap said its had very little use and by the looks of it seems correct.

Thanks in advance

Hi
Update The coil was originally of the Garratt T4 which is a water proof detector the coil directly wired to the control box... hence no plug fitted at time of manufacture.
The plug thats now fitted is wired to work on the Freedom 3 Commander which used a thiner cable .
This coil is as new so once ive fitted the plug with a collar to suite the larger diameter cable will be for sale and put in the respective forum.
Will be open to sensible offers as these coils in this as new condition are rare.
So its designed for the T4 waterproof detector and the Freedom3.
Anyone who know anything about these collectible detectors plus bits and pieces that go with them please get in touch.

Regards