Tweet
I'll get right to the point. I have ordered a surf pi kit from silverdog. My question here relates to the coil I can use. Can I only make a mono coil for the pcb board, or is it possible to wire in a dd coil. I am completely new to detectors, and am figuring with my background in wiring and soldering, it couldn't be too hard. But this part has stumped me on which kind of coil to make and how to wire the din connector with either of the 2. Any information or help will be graciously accepted.
-
-
you can follow this blog is good for you
http://www.adrianandgenese.com/blogg...rom-a-diy-kit/ -
I've read through that blog about 5 times already, I was just trying to figure if I could get a dd coil to work with the pcb board, or if I am limited to a mono.Comment
Comment