Tweet
did anyone know how and where to buy some of These
https://vk.com/wall-33752123?offset=...33752123_68513
https://vk.com/wall-33752123?offset=...33752123_68513
-
-
Yes I have seen those are made in Ukraine, but the seller didn't ship outside the country if I remember right. -
There you go: http://vk.com/korpussa
"В Беларусь отправляете?"
"Только Украина"
I think it means: Would you deliver to Belarus? Only Ukraine.
But if you want you can still buy it if you have contact in Ukraine
Comment
-
look also
http://www.md4u.ru/viewtopic.php?f=31&t=9631
http://www.md4u.ru/viewtopic.php?f=31&t=4596
http://www.md4u.ru/viewtopic.php?f=31&t=9770
casting housings under pressure http://www.md4u.ru/viewtopic.php?f=31&t=4901Comment
-
google image search gives me direct linkOriginally posted by bernte_one View Post
http://quasar.ucoz.net/publ/metalloi...ar_arm/3-1-0-3
[email protected]
[email protected]
bk in address means belonging Belorusia.
this coil is 30 cm diameter in your VK link.Comment
-
whats his email i want oneComment
-
i found him on ebay thanks for your help kt315. dose different sizesComment
-
@junkhunter
can you say the name from ebay account or link one of his offers
thxComment
-
Hi all. Long time lurker, first time poster. Looking for a housing for my MPP project.Originally posted by bernte_one View Post
His eBay seller name is SMQ371. Here is a link to the coil above:
http://pages.ebay.com/link/?nav=item...d=221486502928
Cant believe there are no US sellers of coil housings. Anyone know of any?Comment
-
Try Dfbowers on this forum, he makes some nice looking shells.
I plan on making my own later for the coils I'm building. I have vacumm table at the shop but we have to get the heat system going.
https://sites.google.com/site/dbcoilshells/home
Hope this helpsComment
-
I'm having a hard time finding big mono coil housing (something like 50-60cm).
If I can't find one I will end up spending much time and effort to build one custom.
BTW the link there with ebay coil housing... is advertised for 15$ while it costs 5$ from the manufacturer.Comment
-
Eclypse, If you're in the states, did you try Bill Hayes in Prescott, AZ?
He may ship international.Comment
-
I'm living in Europe.
Anyways I'm planing to make a custom coil, if it doesn't break the bank, but still be probably above 80$ total with all parts and materials, already ordered new lightweight cable.
It can be lightweight and huge in diameter, 55-60cm, because it's not a DD coil so some extra details can be spared.Comment
-
It was my understanding that Bill Hayes had retired and closed up shop more than 2 years ago... Is that now not the case?Originally posted by Ism View PostComment
-
hello eclipse
you can make a good mono coil Shell from a big flower pot an a u-Profile
i Little bit German Brown site but good guy Steven Shows how
http://www.thulemann.de/Hobbyecke-_-Projekte/kat-11.htm
the u-Profile can also be place in the middle line
(][)Comment
Comment