Minelab coils

[Mark-VA]

The guy has the two coils listed like this, didn't make sense.

8" and 10" Minelab Super Goldsearch Mono Coils. They will fit the Minelab Eureka Gold.

I was assuming the super goldsearch mon would fit, but evidently not.

[Mark-VA]

The person might not know what he has for sale. But I think he is a dealer

[shellhouse]

Looking for details on the ML GPX Commander coil connectors. Did these use a standard type of socket?

Picked up a Commander mono coil to use for a project and would like to use the ML socket if at all possible. Have noticed the stuff about White's TDI (Oz edition?) being compatible.. it's too bad they went belly up, otherwise I'd ask them. Speaking of that, I'll contact ML as well but sometimes they don't care to respond.

Thanks guys

[6666]

Looking for details on the ML GPX Commander coil connectors. Did these use a standard type of socket?

Picked up a Commander mono coil to use for a project and would like to use the ML socket if at all possible. Have noticed the stuff about White's TDI (Oz edition?) being compatible.. it's too bad they went belly up, otherwise I'd ask them. Speaking of that, I'll contact ML as well but sometimes they don't care to respond.

Thanks guys

google minelab coil connections in images.

[Altra]

Post #3


https://www.geotech1.com/forums/show...coil+connector




See post #2.

https://www.geotech1.com/forums/show...coil+connector

[39cents]

I'm new here so this may be OLD NEWS, but I happened across this interesting X-ray of the Equinox coil:

https://md-hunter.com/minelab-equino...#comment-52732

[Altra]

I'm new here so this may be OLD NEWS, but I happened across this interesting X-ray of the Equinox coil:

https://md-hunter.com/minelab-equino...#comment-52732

Welcome to the forum

It was discussed here

https://www.geotech1.com/forums/show...hlight=equinox

[39cents]

Welcome to the forum

It was discussed here

https://www.geotech1.com/forums/show...hlight=equinox

Wow thanks the discussion here is amazing! I am going to learn a lot here!

[shellhouse]

Post #3


https://www.geotech1.com/forums/show...coil+connector




See post #2.

https://www.geotech1.com/forums/show...coil+connector

Thanks, the pinout is very helpful. The first thread, post 4, even had links to the connectors, however altronics apears to have, uh, gone under.

Found that the socket is ML service part 60-2302-0043 5 pin socket. Closer but still no traction on getting the part from the dealers I've checked with. Gotta keep.. plugging away at it.

[Altra]

Found that the socket is ML service part 60-2302-0043 5 pin socket. Closer but still no traction on getting the part from the dealers I've checked with. Gotta keep.. plugging away at it.

Try one of these GX20

https://www.ebay.com/sch/i.html?_fro...tion+connector

[shellhouse]

Try one of these GX20

https://www.ebay.com/sch/i.html?_fro...tion+connector

Thanks! Couple of bucks per set, went ahead and ordered a couple to try.