If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
"Next project in development - 2SF work with 4D coils - big DD and small DD - all in one housing (patented). Also 2 frequency detector. But, depend on the soil condition operator can choose different modes:
- one coil / one frequency
- two coils / one frequency
- one coil / two frequency
- two coils / two frequency
What are the advantages of this?
When we are in contaminated sites with many irons - need small coil and high frequency. OK, we choose to work with small DD coil and high frequency.
If you need a depth greater purpose in a clean place - choose big DD coil and a low frequency.
But the icing on the cake will be the joint work of both coils simultaneously both frequencies Much better identification and much better performance in all type of soils."
Comment