WANTED - quasar avr coil

[ripsdevala]

Hello,

Im working on quasar few month ago, and still confusing with the coil, im using ysdragon pcb and im not sure to put capacitor on Rx and Tx, without caps its working, after i put the resin, the coil is not work as before.


If someone have 23cm DD coil template, industance value or another detail, that would help. Thanks

[kt315]

you need to learn russian now... i know... that is bad issue for you, but russians are out of clear english.
ask here http://www.md4u.ru/viewforum.php?f=9...2534187538a742

[horbei]

If I hear that after the Resin the coil does not work anymore, I believe that the resin has move the Coils while hardening. If you are using polyester, the coil deforms when the resin becomes hard. The alignment of the coils (zeroing) is thereby lost. That is why polyester does not shed everything at once, but in layers.

[ripsdevala]

Russian, ukaraine, i have fisit, no data found.
Tshe issue with resin hardening can be fix with thin wire or aluminium to get nulling again, i think

[kt315]

no data found. you are ON SITE OF ANDY. this is HIS FORUM. he done this quasar and you would had have
ask him.