#8 post in this link https://www.geotech1.com/forums/show...hematic-wanted
Announcement
Collapse
No announcement yet.
bbs 1000
Collapse
X
-
-
Originally posted by Altra View PostThe 100nf should be across pin 4 and 7 AD797, it is a bypass filter.
The 100 ohm is correct which provides short circuit protection on output of preamp.
Comment
-
Originally posted by Altra View PostThe schematic is not correct. The 100nf is not on the output. The sovereign and Excalibur have a 1uf coupling cap on the coil input to the main circuit board. The 100nf is across v+ and v- of preamp.ok thank you Altra, i will remove the 100nf capa, and put a bridge instead.
Comment
-
Originally posted by lamoiz View Postmerci les gars
hi kt, on your preamp diagram of 2019, you added a capa of 100nf in series behind r 100, what is the use? is it for decoupled the output?[ATTACH]56232[/ATTACH]
Comment
-
-
two clicks
https://www.aliexpress.com/item/32850810364.html?spm=a2g0o.productlist.0.0.2edd8ed 4GPdDwl&algo_pvid=65361881-8b89-4cdf-b616-563b98332e0c&algo_exp_id=65361881-8b89-4cdf-b616-563b98332e0c-36&pdp_ext_f=%7B"sku_id"%3A"65240629954"%7D
Comment
-
Comment