Announcement

Collapse
No announcement yet.

DETECH SSP 5100 help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DETECH SSP 5100 help

    they bring me an SSP 5100bg from detech, my problem is as follows: it is equipped with a squared coil with integrated magnetometer, the cable is damaged at the level of the plug, the cable is made up of three pairs: red + braid, green + braid and white+braid and I don't have a pinout to resolder these wires in the right place, could someone help me, thank you

    Click image for larger version

Name:	the P-1.jpg
Views:	1
Size:	919.3 KB
ID:	372038Click image for larger version

Name:	UNT BOX-2.jpg
Views:	1
Size:	547.3 KB
ID:	372039Click image for larger version

Name:	BOX SOCKET-3.jpg
Views:	1
Size:	739.0 KB
ID:	372040Click image for larger version

Name:	FROM TRANSF-4.jpg
Views:	1
Size:	1,003.6 KB
ID:	372041

  • #2
    ... ... pls split the pics. NOT SO HARD TO DO.
    Click image for larger version

Name:	the P-1.jpg
Views:	1
Size:	919.3 KB
ID:	372038
    Click image for larger version

Name:	UNT BOX-2.jpg
Views:	1
Size:	547.3 KB
ID:	372039
    Click image for larger version

Name:	BOX SOCKET-3.jpg
Views:	1
Size:	739.0 KB
ID:	372040
    Click image for larger version

Name:	FROM TRANSF-4.jpg
Views:	1
Size:	1,003.6 KB
ID:	372041

    Comment


    • #3
      hello to all, it's OK for the pinout socket of the SSP5100, I contacted DETECH Bulgaria and they kindly provided me with the pinout of the squared coil with embedded mag, like what, their service is present and answer anyone all over the world, it's great, i attach their diagram to anyone who needs it
      Click image for larger version

Name:	SSP 5100 Coil Pinout.JPG
Views:	1
Size:	36.9 KB
ID:	363454

      Comment


      • #4
        Hi, it's me again, I soldered the socket according to detech and the device turns on, you have to connect a coil for the device to turn on, all the functions working except the coil which detects nothing, I measured the resistance between the wires and the values ​​are infinite, the coil is new, does anyone have an idea before I open the coil
        thank you

        Comment


        • #5
          Сопротивление обмотки измеряю между 1 и 5 контактом. Сопротивление равно 2 ома.
          Attached Files

          Comment


          • #6
            Please post in English, thanks.

            Comment


            • #7
              good evening and thank you for the diagram, I have already found the pinout, and I was able to start the detector because I discovered that the detector does not work inside because my house is full of construction iron but it works very good on the outside and I was able to return it to its owner in good working order
              AK48

              Comment


              • #8
                I opened my SSP 5100. I saw a burned-out resistor. In the headphone circuit. I don't know what the denomination is. In this theme there is a desoldering for a large frame. And how to connect an 18-inch round coil. Is there a scheme? I want to make a coil myself.

                Comment


                • #9
                  R24 = 22R0
                  see pics all i have
                  AK48

                  Click image for larger version

Name:	SSP burned part.jpg
Views:	260
Size:	552.6 KB
ID:	411580 Click image for larger version

Name:	SSP burned part.jpg
Views:	257
Size:	552.6 KB
ID:	411581

                  Comment


                  • #10
                    Click image for larger version

Name:	SSP5100 MAG pinot.png
Views:	278
Size:	11.8 KB
ID:	411584 and this for coil pinout and mag

                    Click image for larger version

Name:	SSP5100Squared coil pinout full.jpg
Views:	255
Size:	89.5 KB
ID:	411585

                    Comment


                    • #11
                      I want a picture of the device to rebuild the wires are cut

                      Comment


                      • #12
                        اريد مساعدة في بناء ملف جهاز كم هي حثية و المقاومة ملف الذي يشتغل عليه جهاز

                        Comment


                        • #13
                          Originally posted by Djallale View Post
                          اريد مساعدة في بناء ملف جهاز كم هي حثية و المقاومة ملف الذي يشتغل عليه جهاز
                          Please read the forum rules -> https://www.geotech1.com/forums/foru...-of-the-forums
                          and make your posts in English.

                          Comment


                          • #14
                            AK48 Thank you very much. I didn't even hope for quick help.

                            Comment


                            • #15
                              I marked the connection to the connector with numbers. How the connector is designated is higher in this thread. To clarify: 1-white, 2-black, 3-brown, 4.5.6-red +12 and -12 battery powered.
                              Attached Files

                              Comment

                              Working...
                              X