Announcement

Collapse
No announcement yet.

Shielding of Coils

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    i have the solution

    [QUOTE=detectoman]hi friends i build one bfo, of six transistor, i install one coil of 40x60 cms
    i have one problem, is the extreme sensitive the coil in big sensitivity volume potentiometer to ground effects
    if i like my bfo great depp, actually it detect one ring of car to, 1,30 m
    i can stabilizer in low sentitivity,i succes! , i have poor deep, 50 porcent, i not problem of stabilizer, only in position hig the detector is very instable o desestabilized, i install faraday shield of aluminium wrap, foil and blind copper shiel i not have good results of succes, i nedd one shield stabilizer for this bfo, i build whit my modifications
    this aparatus, is low consumer of energy batery, in 9 volts
    i like your help my thanks
    excusme for my englisk

    eureka encontre la manera de reducir el rechazo a tierra de la bobina de rastreo del bfo ., felicitenme
    ahora solo falta probar si no perdio penetracion
    lo logre en mucha gran medida he reducido la desestabilidad usando una estrategia de un aditamento de campo, que instale en el bobinado de rastreo del cuadro para profundidad de tamaño 65 x45 cms
    sabia que habia formas de hacerlo
    yo estoy feliz
    i am happy

    detectorista mexico


    Comment


    • #17
      Felicitaciones!


      Detectoman, es un arduo trabajo estabilizar un BFO, pero es cierto que si lo consigues y encuentras uno de buena sensibilidad y estabilidad, felicitaciones!


      Dime, qué es estrategia de aditamento de campo?



      Creo que, como te dijo Geo, puedes construir el Barracuda. Creo que hace como 2 o 3 meses Geo envió un PCB en este mismo foro. Pero ahora puedes verlo en el attachment aquí:

      *********

      Detectoman, is a hard job stabilize a BFO, but if you achieve it and good sensibility, conratulations!



      Tell me what is added field?



      Think, as tell you Geo, you can build the Barracuda. 2 or 3 months ago Geo was posted the PCB. You can see here:

      Attached Files

      Comment


      • #18
        Spanish Lingo

        If (like me) you do not understand Spanish, then you can attempt to figure out what these guys are saying by using BabelFish -> http://babel.altavista.com/translate.dyn

        For example - when Estaban says:

        Detectoman, es un arduo trabajo estabilizar un BFO, pero es cierto que si lo consigues y encuentras uno de buena sensibilidad y estabilidad, felicitaciones!
        Dime, qué es estrategia de aditamento de campo?
        Creo que, como te dijo Geo, puedes construir el Barracuda. Creo que hace como 2 o 3 meses Geo envió un PCB en este mismo foro. Pero ahora puedes verlo en el attachment aquí:

        BabelFish translates this as:

        "Detectoman, is an arduous work to stabilize a BFO, but it is certain that if you obtain it and you find one of good sensitivity and stability, congratulations! It tell me, what is strategy of field addition? I believe that, as said Geo to you, you can construct the Barracuda. I believe that it does as 2 or 3 Geo months it sent a PCB in this same forum. But now you can see it in attachment here:"

        Unfortunately, when Detectoman writes:
        eureka encontre la manera de reducir el rechazo a tierra de la bobina de rastreo del bfo ., felicitenme
        ahora solo falta probar si no perdio penetracion

        lo logre en mucha gran medida he reducido la desestabilidad usando una estrategia de un aditamento de campo, que instale en el bobinado de rastreo del cuadro para profundidad de tamaño 65 x45 cms
        sabia que habia formas de hacerlo
        yo estoy feliz
        i am happy

        detectorista mexico


        This gets translated as:

        "eureka encontre the way to reduce the rejection to land of the coil of tracking of bfo., felicitenme now single lack to prove if perdio penetration does not obtain it in much great measurement I have reduced to the desestabilidad using a strategy of a field addition, that installs in the winding of tracking of the picture for wise depth of size 65 x45 cms that habia forms to do it."

        Of well, you can't win them all...

        Comment


        • #19
          la solucion es un delgado alambre de duro acero como los de cable, paralelo a la bobina de rastreo, y este conectado a las dos otras dos terminales abajo en la bobina , por medio de una resistencia variable o potenciometro,estoy haciendo otras experimentaciones, ok la patente es mia 22 de marzo de 2006 miembro geo y chemelec encarguense de registrar la patente a nuestro nombre, estare ocupado
          espero les sirva para sus detectores, este alambre sirve para detener una buena parte de las corrientes de tierra, y si aporta gran estabilidad a mi detector, experimenten con el, ademas receptea otras frecuencias extrañas que hay en el ambiente, hermano, qiaohzi o otro traduceles el reporte por favor

          detectorista jose mexico

          Comment


          • #20
            Originally posted by detectoman
            la solucion es un delgado alambre de duro acero como los de cable, paralelo a la bobina de rastreo, y este conectado a las dos otras dos terminales abajo en la bobina , por medio de una resistencia variable o potenciometro,estoy haciendo otras experimentaciones, ok la patente es mia 22 de marzo de 2006 miembro geo y chemelec encarguense de registrar la patente a nuestro nombre, estare ocupado
            espero les sirva para sus detectores, este alambre sirve para detener una buena parte de las corrientes de tierra, y si aporta gran estabilidad a mi detector, experimenten con el, ademas receptea otras frecuencias extrañas que hay en el ambiente, hermano, qiaohzi o otro traduceles el reporte por favor

            detectorista jose mexico
            English Translation:
            the solution is a thin wire of duro steel like those of cable, parallel to the tracking coil, and this connecting to the two other two terminals down in the coil, by means of a variable resistor or potenciometro, I am doing other experimentations, ok the patent is mia 22 of March of 2006 geo member and chemelec encarguense to register the patent to our name, estare occupied I hope serves to them for its detectors, this wire serves to stop a good part of the ground currents, and if it contributes great stability to my detector, they experience with, ademas receptea other strange frequencies that there is in the atmosphere, brother, or another one traduceles the report please mexico detectorista jose
            Can you post this patent you mentioned to the forum?
            ¿Puede usted fijar esta patente que usted mencionó al foro?

            Comment

            Working...