10'' DD Coil construction for Gold Bug 2 help!!!

[porfirio]

Hi ALL,
I would like to realize a coil 10 '' DD for my fisher gol bub 2!
It is possible? Help, please!!!

Porfirio from Rome,Italy.

[porfirio]

10'' DD Coil construction for Gold Bug 2 help!!!

Hi all,
I have measured the two resistances of my coil (10 xes 5 elliptic coil),
these are the measures of the two resistances of the coil:
Pin4 (+ white) to Pin5 (- mass) is 19.9 ohms
Pin2 (+ red) to Pin3 (- mass screening) is 2.6 ohms
Pin5 without connections.
I hope to one help of yours!

Porfirio

[plboy]

DD coils

pin2 and pin3 will be Tx coil it must be
about 30-50 turns diam 0.55 0.6mm
/for DD 10 inch diam must to be about 7.5inch circle/
pin4 and 5 must to be Rx coil diam 0.2-0.3mm turns 120-150turns it is no so critic...
pin 5 shield of Rx coil or Rx i Tx coils... u must to see when connect the shield ....

Pin4 (+ white) to Pin5 (- mass) is 19.9 ohms
Pin2 (+ red) to Pin3 (- mass screening) is 2.6 ohms
Pin5 without connections.
I hope to one help of yours!

Porfirio[/quote]