hi all.i was wondering if anyone could help me.i have a fisher 1235 for which i have brought a 5 inch head and a 11 inch head.these interchange with the standard 8 inch head with no problem.i lately brought a fisher 1265 and was hoping to use the other heads on it.the problem is the plug is different.on the 1265 the machine has a female socket and the coil a male socket whereas the 1235 and the other coils are the opposite.also the 1265 is a black connector with a slide on fit whereas the 1235 and other coils are silver screw on fit.has anyone come across this other style of connector before and is there any way of changing the plug socket on the 1265 to fit the other coils.cheers for any help.das.
Announcement
Collapse
No announcement yet.
fisher 1265 heads
Collapse
X
-
-
Other words - do not make copies! Buy originals instead! Right?
I would agree if this came from somebody else. But it came from man who is fist here in advertising handmades and copies, same time asking a lot of money for those!
What a double moral!!!
Comment
-
I am glad to see that you finally became selfcritical here!
Very big step for you kt315!!! Bravo!
Man asked here about coil and you instructed him to manufacturer of originals!
Ha,ha,ha!!!
Who is trying to kill forum here!?
At the same time you spreading your advertisments arround, on every posiblle topic here, advertising schematics for money!
You want to take advantage of this forum and earn some money, RIGHT?
Comment
Comment