Pulse Star II

[erolunall]

Test video with handmade coil
http://www.savefile.com/files/1773945

[Unregistered]

why dont you use some normal host server? This savefile offers anything else possible but not normal downloading. Spamming, harassing and risking to catch some trojan instead.
To download file man must suffer many stupid appearances on screen, spam and scum content.

[Qiaozhi]

why dont you use some normal host server? This savefile offers anything else possible but not normal downloading. Spamming, harassing and risking to catch some trojan instead.
To download file man must suffer many stupid appearances on screen, spam and scum content.

I downloaded the file without any problems, spam, trojans, or spyware, etc.
The site was clean.

[Unregistered]

You must be a very happy man, joy for your parents!
I reffered my remarks mainly on stupid and harrasing content on those pages. Everything but donload link which will directly download the file. One click on download button is opening another stupid page. Somwhere on that page is also download link. Another click on that link is opening another idiotic page with various advertisments and po ups. Etc.etc.etc.
Finally i gave up of trying to download damn file. Dont have any more interest of it.
So if you succeed fast do get the file and skipped all the scum in between than you must be a very proud man, congratulation. And goodbye!

[Qiaozhi]

OK Mr Happy - I guess you must be on a Windoze machine. Yes, there's some flash movie there, but I cannot see it with FireFox on Linux. Apart from that, it's the same as with Mr. Gates' software.

You don't actually have to click on the ad.

[Unregistered]

Hrrrmmmphh! I never clicked on any add!
Yes it is damn XP and more damn IE! I agree Linux is superior in those kind of things.
Sooner or later i will skip on Linux.
But is it fair that i have to give up of all my habits in last years and forcedly switch to another os just to have less problems visiting such idiotic places? No it i snot fair. That is why i suggested man to upload files to some better place, some more clean place.

[nelson]

Hi pulse star users.
I m still trying to build a small coil for my pulse star II, but last weekend i tried a small coil of 18 cms in diameter, inductance 136 uH, same has 1 X 1 mts. coil and resistance of 2.8 ohms.
The tests shows very poor performance, just 8 to 10 cms for a 22 mm copper coin. My delta pulse for the same coin, gave 32 cms.
So my question is, should i keep the inductance and resistance same has 1 by 1 mts coil or i should rise the inductande and keep the resistance over 2 ohms?
In advance many thanks
Nelson

More info on download link about pulse star 2

http://www.savefile.com/files/1782200

Uykusuz saying he prepared 1*1 m coil for it like original. He added 2,2 k resistance to paralel Coil and added extra resistor paralel this resistance to get more discirimination sensitivity.He did not measure final resistor ohm but guess is near 1 k ohm.

Regards
Erol

[nelson]

Hi my friend, i m still tring to get some info about values to build a 20 or 28 cms coil for my Pulse Star II Pro.
So if anybne can share inductance and resistance values for small coil to use it with Pulse Star II Pro i wil appreciate it
In advance many thanks
Regards
Nelson

Hello

Some photos available Turkish forum at below Link.
http://www.teknolojiekibi.com/yeni/i...p?topic=1313.0

Regards
Erol

[kt315]

i repeat a letter again for you nelson.

from: aban gooday <abangooday[the dog]yahoo.co.uk>

time: Sat, 3 Sep 2005 04:37:23 +0100 (BST)
subject: SNIFFER-XR71
attached: message.html; sniXR71P_pl1-obr.JPG
Hi,I received your email.i have it original.I saw your site also.You put some shematic and information
about kinds of detector.It is good site.I have Pulstar l and psll scheme and pcb also and other detector shematic which aren`t published in internet.I send you the pic of XR71 and it`s pcb in Protell99SE
format.Nice day Aban
--------------------------------------------------------------------------------
I HAVE THE SNIFFER XR-71 ORIGINAL SHEMATIC AND PCB AND COIL CONFIGURATION.I HAVE BUILT IT AND IT IS GOOD
AND STABLE PI DETECTOR.
MY EMAIL ADDRESS IS ABANGOODAY[the dog]YAHOO.CO.UK

good luck

[nelson]

Hi Kt315, and thanks for reply to my request.
Yes i know that you post this before, but it was hard to find it .
So many thanks again and i hope i can get an anwer from the email you posted.
Regards
Nelson

i repeat a letter again for you nelson.



good luck

[nelson]

Last weekend i finish a 30 cms diameter coil for pulse star II pro, and is working very nice.

The coil data is has follow:

Coil diameter 30 cms.
Coil inductance, 670 uH
Coil resistance, 2.7 ohms
After i finish my coil, results were bad. So i tried to reach 2.2 ohms that my 1 X 1 mtr coil gave me (650 uH, 2.2 ohms).
Then i place in parallel to coil wires, a varible 1K resistor. Then i made test and for my surprice i got a good distance from this coil. My gold weding ring was detected at 25 cms, an aluminium coke can at 70 cms plus, a 1.1 mts aluminum plate at 1.2 mts

I curius if this coil must have or not a shield.

Now i m planning diferent coil sizes for my puls star ii pro.

Any comments will be welcome

Regards

Nelson

Hi my friend, i m still tring to get some info about values to build a 20 or 28 cms coil for my Pulse Star II Pro.
So if anybne can share inductance and resistance values for small coil to use it with Pulse Star II Pro i wil appreciate it
In advance many thanks
Regards
Nelson

[Orbit]

puls star 2 photos

puls star 2 photos

[nelson]

My pulse star looks the same from the outside, but from inside components are smaller and conects to each other by pins.

puls star 2 photos

[Orbit]

pcb/ pulse star 2 !

[bernte_one]

hello

can you sell me pcb for pulse star2 and partlist/ shematic

thanks