musketeer advantage coil

[metaldetector107]

Hi All
can anyone help me? i need data for deepest coinshooting coil for
minelab musketeer advantage with wiring.

any help will be so appriciated

kind regrads

[ivconic]

Ehhh!

All data you can find on Relic Hawk thread, just read all pages...

[metaldetector107]

help please

Dear Ivconic
i did not found the final data from all 37pages, did you ever test your homemade coil for musketeer advantage?
if so what was the resault?
could pleae give data and wiring info

kind regards

[Ultimate_Haze]

Are you dumm?Or what?
TX should be 1mH
RX 14mH
Because you had so many problems with TGSL I dont see how you will make bigger coil for musketeer.But we will see.

[ivconic]

TX=1mH, 2.2 ohms ~approx.
RX=15mH, 35 ohms ~approx.

What former, what wire gauge? You have those noted on that partially faked bulgarian schematic. Schematic is partially faked, but coil data are accurate.
Search back the pages there and you will see. As i remember, i think i posted that schematic somewhere there...

[ivconic]

130 windings, 0.2mm wire
35 windings, 0.55mm wire
etc...etc..

http://www.geotech1.com/forums/showt...ght=relic+hawk

[metaldetector107]

musketeer coil

Dear Ivconic, Ultimate

thanks i know there is the data but according to Max, he saye he made coil TX was 2.5 ohm but didnot oscilate on RH so that is why i am abit confused, with my respect to evryone in the thread but i alwayas 100% follow Ivconic Max Qiaozhe Simon Esteban.. i know Ivconic had musketeer advantage, also RH and advantage pin are not same.

best wishes

[ivconic]

Those data are all i know so far. Measuring original coil i got same. Also made one coil in the past and it is working excellent with Colt (Advantage). Residual voltage is approx. 30mVpp

[metaldetector107]

Musketeer Advantage coil

Dear All
i have checked 10' slim line coil and 12.5 excelerator coil
both coils shows nearly same depth for coins for larg objects i didnot test it yet, can someone tell me are they same or not?

best regrads