HELP PLEASE,COIL DD PULSE INDUCION(40X40CM)

[carlrod49]

hello. helped me make: 50x50cm. was perfect, works 100%. now I want to help build ,COIL DD, PULSE-INDUCTION(40x40cm.)
From: 1200 UH, HOW MANY ROUNDS OF WIRE, TWINE THICKNESS THAT? TWO COPS ARE ON D? CAN SEND ME A DRAWING? THANK,S
CARLOS RODRIGUES
(PORTUGAL)
P.S) DIAGRAMS,IN ANEXO, EMAIL(DEEPERS)

[homefire]

Here are some ball park figures for you.


SIZE TURNS WIRE SIZE INDUCT RESISTANCE
Ø 120 mm Round 36 Ø 0.40 mm / 0.14 mm2 405 µH 1.9 Ohm
Ø 150 mm Round 31 Ø 0.40 mm / 0.14 mm2 394 µH 2.0 Ohm
Ø 175 mm Round 28 Ø 0.40 mm / 0.14 mm2 387 µH 2.1 Ohm
Ø 200 mm Round 26 Ø 0.40 mm / 0.14 mm2 406 µH 2.2 Ohm
Ø 250 mm Round 22 Ø 0.40 mm / 0.14 mm2 380 µH 2.3 Ohm
Ø 300 mm Round 20 Ø 0.50 mm / 0.20 mm2 390 µH 1.6 Ohm
Ø 400 mm Round 17 Ø 0.50 mm / 0.20 mm2 396 µH 1.8 Ohm
Ø 500 mm Round 15 Ø 0.50 mm / 0.20 mm2 400 µH 2.0 Ohm
1.0 x 1.0 m Square 10 Ø 0.66 mm / 0.34 mm2 406 µH 2.0 Ohm
1.4 x 1.4 m Square 8 Ø 0.66 mm / 0.34 mm2 387 µH 2.2 Ohm
1.8 x 1.8 m Square 7 Ø 0.80 mm / 0.50 mm2 398 µH 1.7 Ohm

[carlrod49]

hello to everyone. after I explained to pi, DD, for the same circuit, but to diameter of 30 cm plastic housing. how to connect the terminals of the 2-reel? how many turns of wire in a CADF? the thickness of wire can be in: 0.60 mm? this design is correct osecution? then how it should be? a hug.

hello to everyone. after I explained to pi, DD, for the same circuit, but to diameter of 30 cm plastic housing. ho w to connect the terminals of the 2-reel? how many turns of wire in a CADF? the thickness of wire can be in: 0.60 mm? this design is correct osecution? then how it should be? a hug.

[carlrod49]

hello to everyone. after I explained to pi, DD, for the same circuit, but to diameter of 30 cm plastic housing. how to connect the terminals of the 2-reel? how many turns of wire in a CADF? the thickness of wire can be in: 0.60 mm? this design is correct osecution? then how it should be? a hug.