Minelab FBS Coil Dual Coax Cable

[Jeff In North Georgia]

Does anyone have a source for the Minelab FBS Coil Dual Coax Cable from the control box to the coil? Look like they are two different size coax wires in the same cable.

Thanks!
Jeff

[Carl-NC]

Probably custom made.

[Jeff In North Georgia]

Here is a cross section of the cable.

[Qiaozhi]

Here is a cross section of the cable.

There's something wrong with the attachment. It is not visible, although it appears that it should be a gif file.

[Jeff In North Georgia]

Here is another try at the picture.

[Carl-NC]

Definitely custom.

[Jeff In North Georgia]

Ok. If no one has a sorce for this, what are you using from the Explorer control head to the coil in it's place when making coils for the Explorer series?

Thanks!
Jeff

[Carl-NC]

Not sure I've heard of anyone making homemade Explorer loops, but you can try S-video cable. It's twin coax.

- Carl

[IBGold]

The cable is made in NSW Aust and they will not sell it direct been there tried that, use two separate coax cables as I do when making DD coils I use low capacitance audio cable branded "Soundlink USA High Grade Audio Interconnect OFC Cable" I hope this helps.
Regards, Ian.

[Gyur666]

Can you help me about connector pin out? I'm going to build cable extension for explorer.