LORENZ help please

[Alexismex]

Hello Forum ,
please anybody can help me to find... what is the type of coil connector Lorenz use ??? because i have this detector and the coil base is broken inside.... see the photos
Thank you for your help,
Alexis
Ps. they are too many connectors in catalogue i can not find it!!!and i have mail lorenz but no response!!!

[WM6]

Hi Alexis

It was factored by Franz Binder GmbH + Co. , Germany.

http://www.binder-connector.de/de/kontakt

Probably one of this (Serie 693) or special 7pin order:

http://www.binder-connector.de/de/produkte/272#

[Alexismex]

Thank you very much Wm6 for your help, have a good friend in Mexico,
Thank you again, i will mail and will try to buy in Germany this very special connector....
Alexis.

[ANDREAS]

Hi Alexis
I think see this connector, use electronics circuits cars (maybe BMW). Please look your city (cars dealers) for this.
best regards

[Geo]

Thank you very much Wm6 for your help, have a good friend in Mexico,
Thank you again, i will mail and will try to buy in Germany this very special connector....
Alexis.

Hi Alexis.
Does your Lorenz use the BELDEN-M 8723 cm 2PR22 cable for the big coil??? If yes do you know how many wires are inside??

Regards

[nakky]

Hi Geo ,this is Belden 8723.

Grt Nakky

[Geo]

Thank you Nakky

Regards

[kt315]

Hi Geo ,this is Belden 8723.

Grt Nakky

Nakky, what exterior diameter of this cable is? it is very similar to one White's uses of...

TIA

[nakky]

Hi kt315,it is 4.5 mm and smilair with Tesoro Golden Sabre.

Grt Nakky

[Alexismex]

Hello Geo and Forum
The coil use two coaxial RG 58 C/U MADE IN GERMANY with small piece of black heat shrinkable tubing to tie the two cables....

Alexis

[Geo]

Thank you Alexis.
I had one Deepmax from a friend for service and i saw that the big coil (1x1) was with the Belden - M 8723 CM 2PR22 cable. With this cable he work the coil as 2x2m (1turn) and as 1x1m (2 turns). But the older model had a different coil that worked as 1.5x1.5m (It is better than 1x1 and more easy at field than the 2x2). So i am looking for this cable to make a coil 1.5x1.5m.
Btw, do you measured the inductance and the resistance of the coil???

Regards

[Geo]

Alexis, i just saw carefully your photo. I don't mean the cable between connector and coil but the cable of the coil.

Regards