C-SCOPE CS 1220 XD COIL

[3pinplug]

Hi all
Does anyone know the wiring for this coil or have a diagram on it? Any help much appreciated. Its a:-

C-SCOPE CS 1220 XD 8'' COIL

Thanks
Mark

[Guzzi]

C.Scope coil

This is an older version of C Scope but i expect it works the same.
I have a defective coil opened and made some pictures,
If you are interested I will send on.
I own several older C Scope detectors and i am interested in the non motion types.

regards

Leendert

[3pinplug]

Re: C-Scope Coil

Hi Guzzi
Thank you for the schematics, if you could post the photos of your coil it would be very helpful to me.

Regards

Mark

[Guzzi]

This is the inside of a C Scope coil. There are 2 RX coils and one TX coil.The wire sizes of the RX coils are 0,3 and 0.4 mm. The TX coil wire size is 0.3 mm and i think about 60 turns. The RX coils wire turns are difficult to see. There is NO shield.

[3pinplug]

Hi Guzzi,

Thanks for the photos there great! Don't suppose you have a diagram showing the colours of the wires and the way they are soldered to the conenction plug? It must have been very difficult to take the coil apart looks very well stuck together.
Thanks again
Mark

[Guzzi]

CScope coil wire colors

1 Black

2 Red

3 NC

4 White

5 Green + shield of the cable

In the connector of the 1220 coil 3 and 4 where connected. I removed this connection for a test but the 1220 stil worked.

I hope this helps.

Regards

Leendert

[3pinplug]

C Scope wire colours

Hi Leendert
This is great information you have sent me, thank you very much. One last question if I may, do you know which wire does what i.e Red = Tx, Black = Rx etc????

Regards

Mark

[Guzzi]

Hello Mark

I took some time, sorry

As noted on the schematic (In dutch)

Black = pin 1

Red = pin 2 (Both TX)

Pin 3 to a 150 pF C to pin 5 inside the case of a 1200A

White = pin 4 (RX)

Green = Pin 5 common and shield.

Regards

Leendert

[3pinplug]

Re: Coil

Hi Leendert
many thanks, you've been very helpful.
Regards
Mark