Baracuda coil

[volcano]

Hello all

Please, I want to give me a sketch shows how to make Baracuda coil and all the dimensions and measurements and diameter copper


THANKS

[wallker]

Hi volcano,

for my Barracuda i use spiral coil, shown here: http://www.geotech1.com/forums/showp...9&postcount=21
Specs. for this coil are given here: http://www.geotech1.com/forums/showp...3&postcount=25
Hope this helps you.
Marko.

[volcano]

Hi volcano,

for my Barracuda i use spiral coil, shown here: http://www.geotech1.com/forums/showp...9&postcount=21
Specs. for this coil are given here: http://www.geotech1.com/forums/showp...3&postcount=25
Hope this helps you.
Marko.

thank you mr wallker
But at the 1 st link there is no picture

[wallker]

But at the 1 st link there is no picture

I do not know why you can not see the picture, it is there in the first link.
Anyway I attached picture to you and here:

Regards Marko.

[Tepco]

Hello all

Please, I want to give me a sketch shows how to make Baracuda coil and all the dimensions and measurements and diameter copper


THANKS

I just posted one, but ended up in unsuspected post, try to build this one and compare. If everything is adjusted properely, you will hit 1E coin at 37-38cm.
http://www.geotech1.com/forums/showpost.php?p=149061&postcount=3

[volcano]

THANKS TO ALL