Tweet
Andi68
As far as parts for American equipment, AllDataSheet is great for downloads. I use them myself. If they do not have it, I have to go searching for the data sheets. I do schematics and service manuals. I came, I saw, I conquered. It does not matter to me if someone wants to make a touchdown and in the end zone they dance around, put their arms up, dance what they want to dance, pull their pants down, go down on their knees, or whatever. All I think when I see such childish play, is think "Must be his FIRST touch down"!!!
I stared way back in the past, before there were computers. I have all kinds of data sheet books. I worked on car, before many of you were born. I have full cans of old oil that is before oil detergents. Do you see me pulling my pants down, or going down on my knee, in childish wonder? Nope! I am an adult.
I have all kinds of Parks Reference books, so that I can get another REPLACEMENT part to replace the Damaged part. Now I could take my digital camera, and take lots of photos, but I am not going to do it. So lets just get along, learn from each other, and not get into arguments. Today it is a changing world. What was here in certain years and certain times is most likely gone today. I have seen things come and things go, sometimes so fast that they are a blur to my vision. I have done the job of stripping used parts from PCBs too. I have all kinds of de-solder equipment, so I can remove a IC chip in seconds. Have to clean up the pins though.
We are here to get along and to learn something that someone else knows. Lets keep it that way and get along. It works better working together. One horse tries to pull a loaded wagon, and not until enough horses are hitched up to the wagon, is it when the wagon begins to move and go along like it should go along. We all eat the same way, and we all do other things the same way too. What is in America, is what is in America. What is in Europe, is similar to America, but different. If we work together in a nice way, we all get along and no one person's feeling are injured. Like I used to tell old people in rest homes, who were really frustrated, and attacking each other verbally, "BE NICE" They would look at me, smile and say "You are right. I will be nice from now on". They were hurt, angry, and then saw how they were behaving, and decided to change how they interacted with each other. A smile is better then an angry word. Lets all be happy and thankful that this is a special forum where very good technical information and things are found. Lets be thankful and be happy... I am!
Melbeta
As far as parts for American equipment, AllDataSheet is great for downloads. I use them myself. If they do not have it, I have to go searching for the data sheets. I do schematics and service manuals. I came, I saw, I conquered. It does not matter to me if someone wants to make a touchdown and in the end zone they dance around, put their arms up, dance what they want to dance, pull their pants down, go down on their knees, or whatever. All I think when I see such childish play, is think "Must be his FIRST touch down"!!!
I stared way back in the past, before there were computers. I have all kinds of data sheet books. I worked on car, before many of you were born. I have full cans of old oil that is before oil detergents. Do you see me pulling my pants down, or going down on my knee, in childish wonder? Nope! I am an adult.
I have all kinds of Parks Reference books, so that I can get another REPLACEMENT part to replace the Damaged part. Now I could take my digital camera, and take lots of photos, but I am not going to do it. So lets just get along, learn from each other, and not get into arguments. Today it is a changing world. What was here in certain years and certain times is most likely gone today. I have seen things come and things go, sometimes so fast that they are a blur to my vision. I have done the job of stripping used parts from PCBs too. I have all kinds of de-solder equipment, so I can remove a IC chip in seconds. Have to clean up the pins though.
We are here to get along and to learn something that someone else knows. Lets keep it that way and get along. It works better working together. One horse tries to pull a loaded wagon, and not until enough horses are hitched up to the wagon, is it when the wagon begins to move and go along like it should go along. We all eat the same way, and we all do other things the same way too. What is in America, is what is in America. What is in Europe, is similar to America, but different. If we work together in a nice way, we all get along and no one person's feeling are injured. Like I used to tell old people in rest homes, who were really frustrated, and attacking each other verbally, "BE NICE" They would look at me, smile and say "You are right. I will be nice from now on". They were hurt, angry, and then saw how they were behaving, and decided to change how they interacted with each other. A smile is better then an angry word. Lets all be happy and thankful that this is a special forum where very good technical information and things are found. Lets be thankful and be happy... I am!
Melbeta
Comment