Whites surf pi connectors?

[bklein]

What are the connectors used in the surf pi machines? I want to order some from mouser/digikey/whatever.

[Carl-NC]

What connectors?

[bklein]

Mainly the coil but I think they likely share the same connector series.

[kt315]

just fittings. no connectors. you meant probably garrett one.

[bklein]

No, the simple two and three pin connectors that connect the pots and coil to the pcb in the surf pi machines.
I've been trying to search through distributor websites but not finding them. Popular as hell but what are they.
JST type are similar but not the same. If I had an electronics store nearby they'd have em.
Look to be tenth inch centers.

Barry

[kt315]

https://www.aliexpress.com/item/40-S...e-1f6923c2c7e3

[kt315]

https://www.aliexpress.com/item/50X-...2-0204fe1b984c

[kt315]

https://www.aliexpress.com/item/50se...e-4843e5d82f1b

[bklein]

Nope, seen those on Amazon and other places. Not the same.
There is just a tongue sticking up that latches the female connector in place.
Simple and been around for years - but the kits like this don't seem to be it.

[kt315]

[kt315]

https://www.ebay.com/sch/i.html?_fro...-Pin+&_sacat=0

[bklein]

That looks good! Kf2510. Hmmm. Thanks!

[homefire]

I ordered a pile of various connectors as bench stock. Cheap enough to have some at the handy. Quality is actually quite good. I'm quite sure they're direct knockoffs of SwitchCraft connectors. https://www.banggood.com/search/avia...connector.html

[dbanner]

A well stocked workshop is a dream I someday wish come true. I'm always scavenging for parts. The irony is that the day I get rich enough to buy all the parts/test gear I could ever need will be the day I don't need them because I would lose interest In tinkering. I would be off to the Riviera!
I reuse old connectors scavenged from computer old monitors and discarded junk. Shipping taxes are way too high in addition to taxing all online purchases at 7 % in my country.