Tweet
"No part found" easy workaround on EasyEDA
I didn't know where else to post this so I'll post it here.
If you can't find a part on EasyEDA, find a part with the same footprint and place it on the Schematic/PCB.
After you've placed it, just replace the "Supplier part" number with the LCSC part number you want and press Enter.
All other fields are ignored on the BOM tool.
That's all you need to do and you're ready to order the parts from the BOM tool.
If you can't find a part on EasyEDA, find a part with the same footprint and place it on the Schematic/PCB.
After you've placed it, just replace the "Supplier part" number with the LCSC part number you want and press Enter.
All other fields are ignored on the BOM tool.
That's all you need to do and you're ready to order the parts from the BOM tool.
Comment